Basic Operation
Before starting wireless flash shooting.
Inserting batteries
Usable batteries - Alkaline batteries, Lithium batteries or NiMH batteries.
1. Open the battery compartment door
and insert 2 x size AAA batteries as
shown by the picture.
2. Make sure the + and - battery contacts
are correctly inserted at the battery
compartment.
3. Close the battery compartment door
and slide it back in place.
NOTE
It is recommended to use 2 batteries of the same brand and type, and replace them
all at the same time.
Wrong insertion of each battery would not make electric contact.
2
1
1
2
6