Page 1
Instruction Manual Retro Minnie Highchair Hood, leg rest & car Please print same s Pattern Colour Pantone® Pantone® Pantone® Pantone® 7423c 630c 1895c 630c Character Colour Pantone® Pantone® 410c 162c Ears/Arms Face Legs IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT...
Safety Warnings Getting to know your Highchair Thank you for choosing OBABY. To ensure that your highchair is used in accordance with these instructions, please read them fully. Tray This highchair conforms to BS EN 14988:2006 and is guaranteed for 12 months from the date of purchase against manufacturing defects.
Page 3
The fit of the legs in the frame is very tight for added security. Do not force the legs into (fig.1). position, but apply an even and constant pressure. Should the highchair need to be taken apart, gently push in the spring buttons and evenly ease out the leg assemblies. www.obaby.co.uk www.obaby.co.uk...
Page 4
Lift the tray above the seat (fig.21) and fold the legs together (fig.22). Then lower the tray (fig.23 & 24). Lower the tray down onto the front frame (fig.15) and push the tray and frame together until it clicks into place (fig.16). Secure the tray using the strap and press-stud (fig.17 & 18). www.obaby.co.uk www.obaby.co.uk...
(fig.25) and clip each chest strap onto the waist strap (fig.26 & 27). To release the harness, squeeze each of the clips in the centre of the harness and pull away from the clasp, one at a time (fig.28). Adjust the harness length using the buckles on each strap (fig.29). www.obaby.co.uk www.obaby.co.uk...