Selecting Channel - Panasonic tx-l55wt65b Ehelp

= Note =
External equipment and cables shown are not supplied with this TV.
●
Please also read the manual of the equipment being connected.
●
Keep the TV away from electronic equipment (video equipment, etc.) or
●
equipment with an infrared sensor, otherwise distortion of image / sound
may occur or operation of other equipment may be affected.
When using a SCART or HDMI cable, it is recommended to use fully wired
●
one.
Check the terminal type and cable plugs are correct when connecting.
●

Selecting channel

1. Display the TV Selection
2. Select the mode with
freesat (UK only) /
(Ireland only)
Other Sat. is displayed if
●
channels.
Watching
The selectable modes vary depending on the channels stored.
●
You can also select the mode pressing
●
control or INPUT/OK/HOLD for MENU button on the control panel of
the TV.
If the TV Selection
●
3. Select a channel with Channel Up / Down or numeric buttons
freesat channel position numbers are in the 100 - 999 and 0100 - 0999
●
ranges. DVB and Other Sat. / Satellite channel position begin from
number 1 upward. Analogue channel position numbers are in the 0 - 99
range.
■
To select a channel using information banner
It is possible to confirm the channel name and programme information by
using the information banner before changing channels.
1. Display information banner with
2. Select a channel with
displayed
Watching
screen with TV
/ and press
DVB / Analogue / Other Sat.
Auto Setup
Tuning and editing channels
menu is not displayed, press
if it is not displayed
/ and press
Basic Information banner
- 19 -
OK to set
(UK only) / Satellite
is completed for Other Sat.
Auto Setup
TV repeatedly on the remote
TV to switch the mode.
OK to watch while the banner is