Bluetooth Pairing Function; Usb Charging - Bosch pb360c Operating And Safety Instructions Manual

BM 2610032718 07-15.qxp_BM 2610027750 01-13.qxp 7/17/15 10:38 AM Page 9

Bluetooth Pairing Function

1. Make sure your personal device's Bluetooth is turned on.
2. Turn on unit by pressing the Power button.
3. Press the Bluetooth "Pairing" button or the "Source"
button until "bt" is displayed on the lower right hand side
of the LCD screen and a blue light is slowly flashing on
the front of the unit.
4. Hold the Bluetooth "Pairing" button on the unit until the
blue light rapidly flashes.
5. Once the light is rapidly flashing select "PB360C" from
your personal devices Bluetooth menu.
6. Once the devices have been linked the flashing blue
light will stop flashing and remain on.
7. Select music from your personal device that you would
like to play.
8. Make sure to check the volume level on your personal
device as this will impact the volume output on the unit.
Note: Set your personal device audio output level to
100% to maximize audio output on the unit. Now control
volume with the volume control knob on the unit.
9. Press play on your personal device and enjoy.

USB Charging

The USB port is designed to charge most USB-enabled
devices such as cell phones and external digital media players.
Follow the steps below to charge your USB-enabled device:
1. Make sure your Jobsite Stereo is plugged into a 120V
power source.
2. Insert the USB end of your device cable into the USB port
inside the Digital Media Bay. Insert the other end of your
device cable into your device. Your device should begin to
charge.
Note: With your Jobsite Stereo plugged into a 120V power
source your USB-enabled device will power at any time,
regardless of which SOURCE your Jobsite Stereo is being
used. * Not guaranteed to work with all USB-enabled devices.
BLUETOOTH
PAIRING LIGHT
USB
PORT
9
BLUETOOTH
BLUETOOTH
PAIRING
BUTTON