Connection, Hdmi Settings - Panasonic DMR-EX75 Operating Instructions Manual

FUNCTIONS
FUNCTIONS
To Others
Setup
TV Aspect
Progressive
TV System
Tuning
Disc HDMI Settings
Picture
AV1 Output ( Scart )
Sound
AV2 Settings
Display
Active Antenna
Connection
TAB
SELECT
Others
ENTER
AV-Link function
Switching between television reception and
the signal from the DVD Recorder. This
function is only possible if the AV1 Output
is set to [Video ( with component )] or
[RGB 2 ( without component )].
DVD recorder signal: Press ENTER + 0.
DVD appears on the display.
Television reception: Press the buttons again.
TV appears on the display.
Setup
AV2 Settings
AV2 Input
Tuning
Ext Link
Disc
Picture
Sound
Display
AV2 Input
Connection
Others RGB / Video
RGB
Video
S Video
SELECT
ENTER
RETURN
Not NTSC:
RGB / Video, S VIDEO, Ext Link 1, Ext Link 2.
Setup
SETUP
Connection
16:9
Off
TV Aspect
PAL
Select the TV screen format of your television. Programmes in 16:9 format are recorded
Video
in 4:3 format. 16:9 format is used to record to HDD/RAM.
Letterbox: Black bars appear on the upper and lower edges of the screen (16:9).
Off
Progressive
RETURN
On: The signal is displayed in full-picture quality using COMPONENT VIDEO OUT.
Cannot be changed over when HDMI [Digital Audio Output] is set to [Automatic] and
the HDMI terminal is being used.
TV System
PAL: You connect the unit to a PAL or multi-system television. Programmes that were
recorded with NTSC are played as PAL60.
NTSC: You connect the unit to an NTSC television. Programmes that were recorded
with NTSC are played as NTSC.
HDMI Settings
HDMI (High Definition Multimedia Interface) is a digital interface for Audio and Video.
One single cable transfers both digital video data (pictures) and also digital audio data.
There is no longer any need to convert analogue-digital or digital-analogue.
HDMI works without data compression so that there is therefore no quality loss from
the system.
AV1 Output ( Scart )
Video ( with Component ): Factory-default settings.
S Video ( with Component ): Select when a TV is connected that can receive an
S Video signal.
RGB 1 ( without Component ): RGB output is available all the time while this unit
is on.
RGB 2 ( without Component ): RGB output is available only during playback or on-
screen display.
AV2 Settings
RGB / Video
Ext Link 2
AV2 Input
RGB / Video: When receiving or recording RGB output from external equipment.
RGB, Video, S Video: The input is switched to the selected signal.
Ext Link
Ext Link 1:
Ext Link 2:
Active Antenna
On: When you connect an aerial which shares the power circuit of the DVD Recorder.
Start the Auto Setup again after making the adjustment and check the
Signal Condition.
Setting
AV2 Input
Ext Link
For digital receivers that send a special recording control signal,
for example, the F.U.N. receiver (TU-DSF41).
External recording control for satellite or digital receivers (video signal).
Option
ENTER
[16:9] [4:3] [Letterbox]
[On] [Off]
[PAL] [NTSC]
[Video ( with Component )]
[S Video ( with Component )]
[RGB 1 ( without Component )]
[RGB 2 ( without Component )]
Perform the settings in the
following submenus for the
connected unit.
[RGB / Video] [RGB] [Video] [S Video]
[Ext Link1] [Ext Link 2]
[On] [Off]
ENTER
99 19
66 99
60 99
65