Download Print this page
Control 4 C4-WMB-B Setup Manual
Control 4 C4-WMB-B Setup Manual

Control 4 C4-WMB-B Setup Manual

Wireless music bridge

Advertisement

Quick Links

Wireless Music Bridge
Installation and

Setup Guide

Supported Model
C4-WMB-B
Wireless Music Bridge
Introduction
The Control4® Wireless Music Bridge lets you
play music, Internet radio, and podcasts from
your smartphone devices through iOS (AirPlay®),
Bluetooth®, Android™ or Windows (using DLNA®).
Simply attach the Wireless Music Bridge cables to a
Control4 4-Zone Amplifier or Multi Channel Amplifier,
add the device to a room in Composer, and you're
ready to go. This device supports OS 2.5.0 or later.
The Wireless Music Bridge makes it easy to stream
popular Internet music services, such as Pandora®
and Spotify®, to any room in a home, using your
smartphone. To enjoy separate streams of music,
connect one Wireless Music Bridge for each zone on
a 4-Zone Amplifier or Multi Channel Amplifier.
The Wireless Music Bridge allows one (1)
smartphone/tablet to be connected to the Control4
system at a time. It is possible for multiple phones
to connect to the Wireless Music Bridge, but only
one phone can output audio. More than one Wireless
Music Bridge can be used in a Control4 system
simultaneously, allowing individual users to connect
their phone to their room of choice.
Each Wireless Music Bridge can be given a unique
name that appears on their smartphone/tablet and
can be assigned to a specific room. It is also possible
to assign the Wireless Music Bridge to an individual,
so that the individual can listen to his/her music in
their room of choice.
This device uses Ethernet or WiFi connectivity to
communicate with the Control4 system.
Requirements
• Control4 OS 2.5.0 or later.
• Control4 controller fully installed and configured
with a Control4 project.
• Powered speakers or an available connection on
an amplifier or stereo.

Box Contents

Carefully unpack the contents from the box, and
make sure the following items are included:
• Wireless Music Bridge
• Power Supply
• Warranty Card
If any of these items is missing or damaged, please
contact Control4 immediately.

Specifications

Dimensions
6.29" (160 mm) x 4.72" (120 mm) x 1.57"
(W x D x H)
(40 mm)
Weight
1.05 lbs. (.47 kg)
Shipping Weight
1.5 lbs. (.69 kg)
Network
10/100 BaseT Ethernet RJ-45 (preferred)
or WiFi (802.11 b/g)
Power Supply
DC - 5V @ 1.0A
Connectivity
10/100 BaseT Ethernet RJ-45 (preferred)
WiFi (802.11b/g)
Bluetooth v1.2 A2DP
Outputs
Stereo Analog
Digital SPDIF
1

Advertisement

loading

Summary of Contents for Control 4 C4-WMB-B

  • Page 1: Box Contents

    • Powered speakers or an available connection on an amplifier or stereo. Box Contents Supported Model Carefully unpack the contents from the box, and make sure the following items are included: C4-WMB-B Wireless Music Bridge • Wireless Music Bridge Introduction • Power Supply • Warranty Card The Control4®...
  • Page 2: Front View

    Back View ™ 2 2 2 6 2 2 7 Wireless Music Bridge Installation and Setup Guide 5V DC (power jack)—Only connect the provided 5V power supply. Reset (button)—Press one time to reset the Wireless Music Bridge but maintain its network Front View settings.
  • Page 3: Pre-Installation Considerations

    spectrum and can interfere with each other, therefore, IMPORTANT! Control4 recommends that you it is recommended to install the system with a wired use an Ethernet connection rather than WiFi connection. for the best communication with the Control4 system. Installation Pre-Installation Considerations To connect the Wireless Music Bridge: Place the Wireless Music Bridge on a table...
  • Page 4 Open Composer Pro and click Tools > System For Bluetooth, the device-friendly name is appended Manager to reconfigure the bridge for WiFi. with a -BT. This allows devices, such as iPhone, to In the Devices pane, select the network address uniquely distinguish between AirPlay and Bluetooth for the Wireless Music Bridge, and then click connectivity.
  • Page 5: Troubleshooting

    Apple® Support NOTE: As with all WiFi products, Bluetooth performance and range varies based on *The Wireless Music Bridge is made for iPod touch® 2nd generation, environmental conditions. The Wireless 3rd generation, 4th generation, and 5th generation; iPhone® 3GS, Music Bridge uses a Class 2 Bluetooth iPhone 4, iPhone 4siPhone 5;...