Subscribe to Our Youtube Channel
Summary of Contents for Techpro NVR-PRE16C-P
- Page 1 Prime Series NVR - User's Manual NVR-PRE16C-P 1080p Control View From Resolution Motion Anywhere Activated Warranty Recording...
-
Page 2: Table Of Contents
OUR UNITS DO NOT SUPPORT PAL TABLE OF CONTENTS NVR Pre-Installation NVR Installation Hard Disk Installation Front Panel Peripheral Connections Wiring of Alarm Input Wiring of Alarm Output Using of Alarm Connectors Controller Connection Specifications HDD Storage Calculation Chart Accessing by Web Browser Logging In Live View Recording... -
Page 3: Nvr Pre-Installation
NVR Pre-Installation These series NVR are highly advanced surveillance equipment that should be installed with care. Please take into consideration the following precautionary steps before installation of the NVR. 1. Keep all liquids away from the NVR. 2. Install the NVR in a well-ventilated and dust-free area. 3. - Page 4 Remove the cover from the NVR by unfastening the screws on the rear and side panel. Connect one end of the data cable to the motherboard of NVR and the other end to the HDD. 3. Connect the power cable to the HDD. 4.
- Page 5 Remove the cover from the NVR by unfastening the screws on the rear and side panel.
- Page 6 Name Function Description POWER ON/OFF Power on/off switch. USB Interface Connect to USB mouse or USB flash memory. IR Receiver Receiver for IR remote control. devices. POWER Power indicator lights in green when DVR is powered up. READY Ready indicator is normally green, indicating that the DVR is functioning properly. Indicator turns green when DVR is controlled by an IR remote control with the address from 1~254;...
- Page 7 Slot for DVD-ROM. DVD-ROM The DIRECTION buttons are used to navigate between different fields and items in menus. In Playback mode, the Up and Down button is used to speed up and slow down recorded video. DIRECTION In All-day Playback mode, the Left/Right button can be used to select the recorded video of next/previous day;...
- Page 8 Slot for DVD-ROM. DVD-ROM The DIRECTION buttons are used to navigate between different fields and items in menus. In Playback mode, the Up and Down button is used to speed up and slow down recorded video. DIRECTION In All-day Playback mode, the Left/Right button can be used to select the recorded video of next/previous day;...
- Page 9 Item Description VIDEO OUT BNC connector for video output. CVBS AUDIO OUT BNC connector for audio output. This connector is synchronized with CVBS video output. VGA AUDIO OUT BNC connector for audio output. This connector is synchronized with VGA video output. LINE IN BNC connector for audio input.
-
Page 10: Peripheral Connections
Quick Operation Guide of Network Video Recorder Peripheral Connections Wiring of Alarm Input The alarm input is an open/closed relay. To connect the alarm input to the device, use the following diagram. If the alarm input is not an open/close relay, please connect an external relay between the alarm input and the device. -
Page 11: Controller Connection
Quick Operation Guide of Network Video Recorder 3. Connect pluggable block back into terminal block. Controller Connection To connect a controller to the NVR: 1. Disconnect pluggable block from the KB terminal block. 2. Unfasten stop screws from the KB D+, D- pluggable block, insert signal cables into slots and fasten stop screws. -
Page 12: Specifications
Quick Operation Guide of Network Video Recorder Specifications Model 64-ch IP video input Video/Audio 1-ch, BNC (2.0 Vp-p, 1kΩ) input Two-way audio 160Mbps Incoming bandwidth Outgoing bandwidth 160Mbps Network Remote Connection 5MP /3MP /1080P /UXGA /720P /VGA /4CIF /DCIF /2CIF /CIF Recording resolution /QCIF 1-ch, BNC (1.0 Vp-p, 75 Ω) - Page 13 Quick Operation Guide of Network Video Recorder Model IP video input 8-ch 16-ch 32-ch Video/Audio input 1-ch, BNC (2.0 Vp-p, 1kΩ) Two-way audio Incoming bandwidth 40Mbps 80Mbps 160Mbps Network Outgoing bandwidth 240Mbps 240Mbps 160Mbps Remote Connection 5MP /3MP /1080P /UXGA /720P /VGA /4CIF /DCIF /2CIF /CIF Record resolution /QCIF Main stream: 25 fps (P) / 30 fps (N)
-
Page 14: Hdd Storage Calculation Chart
Quick Operation Guide of Network Video Recorder HDD Storage Calculation Chart The following chart shows an estimation of storage space used based on recording at one channel for an hour at a fixed bit rate. Bit Rate Storage Used 128K 160K 192K 224K... -
Page 15: Accessing By Web Browser
Quick Operation Guide of Network Video Recorder Accessing by Web Browser Logging In You can get access to the device via web browser. Open web browser, input the IP address of the device and then press Enter. The login interface appears. Input the user name and password, and click the Login button. -
Page 16: Recording
Quick Operation Guide of Network Video Recorder Interface Introduction Name Description Displays the list of channels and the playing and recording status of each channel. Channel List The stream type can be switched by clicking the icon before the channel name: stands for main stream and for sub-stream. - Page 17 Quick Operation Guide of Network Video Recorder 3. Check the checkbox of Enable Schedule to enable recording schedule. 4. Choose the day in a week to configure scheduled recording. 5. Click Edit to edit record schedule. 1) Configure All Day or Customize Record: ...
-
Page 18: Playback
Quick Operation Guide of Network Video Recorder Playback Interface Introduction Name Description Channel List Displays the list of channels and the playing status of each channel. Playback Window Displays the image of channel. Play Control Bar Play control operations are supported. Time Line Displays the time bar and the records marked with different colors. -
Page 19: Log
Quick Operation Guide of Network Video Recorder Area Description Area Description Full screen Transcoded playback Reverse playback Window division You can drag the progress bar with the mouse to locate the exact playback point. You can also input the time in the textbox and click button to locate the playback point. -
Page 20: Menu Operation
Quick Operation Guide of Network Video Recorder Menu Operation Menu Structure The menu structure of the NRA00, NR500 and NR50P Series NVR: The menu structure of the NRA0R Series NVR: Startup and Shutdown Proper startup and shutdown procedures are crucial to expanding the life of the NVR. To start your NVR: 1. -
Page 21: Live View
Quick Operation Guide of Network Video Recorder Uninterruptible Power Supply (UPS) be used in conjunction with the device. The Power button (for the NRA00 and NRA0R series NVR) on the front panel should be red, indicating the device gets the power supply. - Page 22 Quick Operation Guide of Network Video Recorder Select Add IP Camera in the pop-up menu to enter the IP Camera Management interface. The online cameras with same network segment will be displayed in the camera list. Click the button to add the camera.
-
Page 23: One-Touch Raid Configuration
Quick Operation Guide of Network Video Recorder To add other IP cameras: Click the Custom Adding button to pop up the Add IP Camera (Custom) interface. You can edit the IP address, protocol, management port, and other information of the IP camera to be added. -
Page 24: Instant Recording
Quick Operation Guide of Network Video Recorder 2. Click One-touch Configuration to enter the One-touch Array Configuration interface. 3. Edit the array name in the Array Name text filed and click OK button to start configuring array. If you install 4 HDDs or above for one-touch configuration, a hot spare disk will be set by default. It is recommended to set hot spare disk for automatically rebuilding the array when the array is abnormal. -
Page 25: All-Day Recording
Quick Operation Guide of Network Video Recorder Click the icon to enable the record, and the icon turns to . And click icon to disable the record, then the icon turns to All-day Recording Steps: 1. On the live view window, right lick the window and move the cursor to the Start Recording option, and select Continuous Record or Motion Detection Record on your demand. -
Page 26: Backup
Quick Operation Guide of Network Video Recorder Front Panel: press PLAY button to play back record files of the channel under single-screen live view. Under multi-screen live view, record files of the selected channel will be played back. Pressing numerical buttons will switch playback to related channels during playback process. 2. - Page 27 Quick Operation Guide of Network Video Recorder 2. Enter Export interface, choose backup device and click Export button to start exporting. 3. Check backup result. Choose the record file in Export interface and click button to check it.
Need help?
Do you have a question about the NVR-PRE16C-P and is the answer not in the manual?
Questions and answers