Opel 2016 Carl Owner's Manual page 119

OPEL Karl Owner Manual (GMK-Localizing-EU RHD-9231168) - 2016 - crc -
5/7/15
118 Infotainment System
It is recommended to keep the
car windows closed during
hands-free calls for best results.
This unit uses the following
Bluetooth profiles:
Phone Book Access
Profile (PBAP)
Hands Free Profile (HFP)
Advanced Audio Distribution
Profile (A2DP)
Audio Video Remote Control
Profile (AVRCP)
If the Bluetooth profiles do not
match, the system will display
the Action not supported by this
device pop-up on the display
screen (e.g. device is not able to
control the TUNE dial).
Before using Bluetooth
music mode
Bluetooth Audio mode can be
used only if a Bluetooth Audio
device has been connected.
If music is not yet playing from
your mobile device after
switching to streaming audio
(Bluetooth Audio) mode or after
pressing Play on the mobile
device itself, try to start music
playback by pressing the Play
button again.
Check whether music from the
Bluetooth device is playing after
converting to streaming audio
mode. The Streaming audio
feature may not be supported by
some mobile phones.
If the Bluetooth phone is
disconnected while Bluetooth
Audio mode is active, then the
music will also stop.
Bluetooth streaming audio may
not be supported by some
mobile phones.
If the Bluetooth indicator is not
displayed, then no Bluetooth
device is connected or the
connection is not of satisfactory
quality.
This unit can pair up to 5
Bluetooth devices.
Connecting Bluetooth
Registering the Bluetooth device
Register the Bluetooth device to be
connected to the Infotainment
system.
Firstly, set up the Bluetooth device
to be connected from the Bluetooth
settings menu to enable other
devices to search for the Bluetooth
device.
Press PHONE to enter the Phone
application mode.
To select Pair, press -. The
information Name: Device name /
PIN: 0000 appears in the display
screen and then the Pairing
progress starts.
If no phone source is connected,
the status region displays No
Device Paired .
To change the PIN, press the -
and select New Pin in the Pair
menu. Turn and press MENU to
change the PIN.
From the Bluetooth device, search
for this unit and pair the device.