Two versions of the BSA are available for order and both supports Bluetooth Serial Port Profile (SPP) Headset connection is available on the RT-O-BT1-MX2 so Hands-Free Profile Audio Gateway (HFP-AG) is easily used and installed on RTCU X32 units with headset connector.
Status LED (BiColor) Communication and power connector. Connect to RTCU X32 Serial port 1 RT-O-BT1-DX4 Page 5 of 11 Logic IO ApS. Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com Denmark www.logicio.com / www.rtcu.dk...
BSA buffers are ready again. Please refer to the RTCU IDE online help for further information. Page 6 of 11 Logic IO ApS. Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com...
MX2i Pro/Pro+ There are two connection cables to the MX2i from the BSA; one 2,5 mm jack headset connector (RT-O-BT1-MX2 only), and one 6-poled tyco connector for supply and communication. 1. If an application program for using the BSA not already uploaded to the MX2i unit, be sure to choose the Serial Port 2 as alternative service port, as BSA will occupy the default service port.
Page 8
As the cable length doesn’t allow the module to be mounted outside of the enclosure, the recommended mounting location inside the enclosure is as following: Page 8 of 11 Logic IO ApS. Ph: (+45) 7625 0210 Holmboes Allé 14...
The bicolor status-LED is can be controlled by the VPL application to indicate different states of the BSA. Please refer to the RTCU IDE online help for further information. Page 10 of 11 Logic IO ApS. Ph: (+45) 7625 0210 Holmboes Allé 14...