Connections - Panasonic TH-85X940A Viera Operating Instructions Manual

Connections

●
External equipment and cables shown are not
supplied with this TV.
●
Please ensure that the unit is disconnected from the
mains socket before attaching or disconnecting any
cables.
●
Check the terminal type and cable plugs are correct
when connecting.
●
Use a fully wired HDMI compliant cable.
● Keep the TV away from electronic equipment (video
equipment, etc.) or equipment with an infrared sensor,
otherwise distortion of image / sound may occur or
operation of other equipment may be affected.
●
Please also read the manual of the equipment being
connected.
Terminals
1
5 6
1 SD Card slot
2 USB 1 - 3 port
3 HDMI1 - 3 (p. 9, 10)
4 DIGITAL AUDIO OUT
5 ETHERNET (p. 9)
6 Aerial terminal
7 AV (COMPONENT / VIDEO)
8 DisplayPort™
9 HDMI4
●
To watch contents of 4K format, use HDMI terminal or
DisplayPort. (p. 9)
8
English
2
3
4
7
(p. 8)
(p. 10)
(p. 9, 10)
Basic connections
■
Mains lead
Mains lead
Cable tie (Bundled the mains lead)
To loosen:
Knob
To remove from the TV:
The removed cable tie can be used to bundle other
connected cables.
■
Aerial
TV
RF cable
8 9
Aerial
●
For Digital TV, Analogue TV
●
Keep RF (aerial) cable away from the mains lead to
avoid and minimise mains interference pickup.
●
Do not place the RF cable under the TV.
An aerial, correct cable (75 Ω coaxial) and correct
●
terminating plug are required to obtain optimum
quality picture and sound.
●
If a communal aerial system is used, you may require
the correct connection cable and plug between the
wall aerial socket and the TV.
●
Your local Television Service Centre or dealer may
be able to assist you in obtaining the correct aerial
system for your particular area and the accessories
required.
AC 220-240 V
50 / 60 Hz
Keep pushing the knob
Snaps
Keep pushing both side snaps
(p. 11)