Eurotech FR-291 WH User Manual

Refrigerator freezer

Advertisement


USER'S MANUAL
MODEL:FR-291 WH
FR-291 SS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FR-291 WH and is the answer not in the manual?

Questions and answers

Summary of Contents for Eurotech FR-291 WH

  • Page 1  USER'S MANUAL MODEL:FR-291 WH FR-291 SS...
  • Page 2 1 Structure lllustration The sample cutline is representation of this series of refrigerator, which have similar structure and different capacity . 1. Freezer temperature 6. Vegetable basket control knob 7. Freezer door rail 2. Refrigerator temperature control 8. Refrigerator door rail knob 9.
  • Page 3: Instructions For Installation

    2 Instructions for installation 1.Install on a completely flat and rigid surface. Level the refrigerator by rotating the adjustable Legs located at front corners. The refrigerator is then securely positioned. Above 30 cm 2.Leave at least 2 cm between both sides of the refrigerator and the wall, and at least 30 cm between the top of the refrigerator and the surface immediately above, so that the...
  • Page 5: Usage Instructions

    4. Usage Instructions 3.Placement of food 5.Placement of food Keep the chilled case at about There should always be some , for best storing of meat, fish, space between food to maintain shell-fish and milk. The optimum cold air circulation. storing period is within three days.
  • Page 7: Maintenance

    6. Maintenance 1.While cleaning the refrigerator, 4.If the refrigerator is out of use for pull out the electric power plug, rub a long time, please pull out the carefully with a piece of cloth plug, clean and dry the interior socked with natural cleanser then compartment, then close the doors wipe with clean water.
  • Page 10 A) TYPE X ATTACHMENT WITH SPECIALLY PREPARED CORD-DAMAGED SUPPLY CORDS MUST BE REPLACED BY A SPECIAL CORD OR ASSEMBLY AVAILABLE FROM THE MANUFACTURER OR ITS SERVICE AGENT B) TYPE Y ATTACHMENT-DAMAGED SUPPLY CORDS TO BE REPLACED BY THE MANUFACTURER, SERVICE AGENT OR SIMILARLY QUALIFIED PERSON TO AVOID HAZARD C) TYPE Z ATTACHMENT-DAMAGED SUPPLY CORD CANNOT BE REPLACED AND THE APPLIANCE SHOULD BE SCRAPPED...

This manual is also suitable for:

Fr-291 ss

Table of Contents