Table of Contents
Advertisement
Electrical Connection
Connection with Digital Surround Processor (CY-AC300)
Connection with Digital Surround Processor (CY-AC300, option) and Power Amplifiers (option).
Note: Refer to the operating instructions for the connected devices, in addition.
Digital Surround Processor
51
CY-AC300
(option)
DIGITA
L
SSOR
PRO LOGIC
PROCE
AL SURR
OUND
DIGAT
r Spea
ker
Cente
ifier for
Powe
r Ampl
displ ay
& 30w
-colo r
t multi
supe r
brigh
CY-AC300
Main Unit (Rear)
Ground Lead
To a clean, bare metallic part of the
(Black)
car chassis
ACC (or IGN) Power Lead
(Red)
To ACC power,
ACC
+12 V DC
Resistor (220 Ω)
(Yellow)
Battery Lead
BATTERY 5A
To the car battery,
Fuse (5 A)
continuous +12 V DC
(Black/green stripe)
CENTER
Center Speaker Cord
(Black)
AMP-CONT MAX 0.1A
(Blue/white stripe)
External
Amplifier
Control Power
Amplifier Control Power Lead
Lead
(Blue/white stripe)
(Connect to AMP-CONT)
Center Speaker
EAB-CF2
(option)
Sub-Woofer
(option)
*
For use as a monaural amplifier (Bridge connection)
52
CX-DH801W
(Continued)
Operating Unit/Main Unit
Connecting DIN Cord
(Supplied with CY-AC300)
SUB•W (MONO)
ANALOG-IN
REAR
FRONT
DIGITAL-IN
(Front)
L L
Optical Fiber Cable
(CA-LRD60, option)
L
R
R R
Power
Connector
(L)
(R)
(Supplied with
(L)
(R)
(L)
(R)
CY-AC300)
RCA Cable (option)
(When a Y-shaped
cord is used)
RCA Cable
(L)
(R)
(L)
(R)
(option)
External Power
External Power
Amplifier
Amplifier
(option)*
(option)
Amplifier Control
Power Lead
(Blue/white stripe)
Left
Right
Left
Right
Speaker
Speaker
Speaker
Speaker
(Rear)
(Rear)
(Front)
(Front)
(option)
Note on handling optical fiber cable:
¡Do not allow the cable to be damaged by getting it caught in the door,
placing a heavy object on it, etc.
¡Make sure that the cable is not strained when it is connected.
¡Do not bend the cable sharply.
¡Install the DVD changer in where it prevents the optical fiber connector
from hitting its surroundings.
DVD Changer
CX-DH801W
(BRAKE/VIDEO-CONT/ACC/BATT/DIN/RCA/GND)
Ground
Lead
To a clean, bare metallic part of the
car chassis
(L)
Power
Lead Not used. Do not connect the Power Lead
(R)
(ACC) if the control unit is equipped.
Battery Lead
To the car battery, continuous + 12 V DC.
Video Output (Yellow)
Audio Output (L) (White)
Audio Output (R) (Red)
RCA Cable
(option)
(L) (White)
(R) (Red)
Note: Select [VTR] in [CH INPUT] of the [INPUT/OUTPUT] menu in advance if you would like to watch the display of the
DVD changer with CQ-VD7001W
DVD Changer
CX-DH801W
(Left)
(rear)
H
V
B
H
C
V
M4X5mmMAX
C
V.A.B
H.A
Fuse 5A
REMOTE-IN
Remote-In
u
Extension Cord
(RCA) (Black)
Not used.
Parking Brake Lead
(Black)
PARKING BRAKE
(Blue/yellow stripe)
Be sure to wire the parking brake
(Red)
for safety and preventing accident.
ACC
ACC
Video control Lead (output)
(Green/yellow stripe) Not used.
VIDEO-CNT
BATTERY 5A
(Yellow)
DIN Cable (Black)
To the changer
RCA Cable
connector.
DIN Connector
Audio Output
CQ-VD7001W
(option)
(R) (Red)
(L) (White)
CH/AUX IN
Changer Input Connector
VTR IN
Video Output
Video Input Terminal
(Yellow)
Terminal
VIDEO OUT
Pre-out (Front)
PRE-OUT FRONT
(a
page 7).
25 mm or more
52
Note: Never use both Remote-Ins
(one is mini-pin jack, the other is RCA
jack) at the same time. Failure to
observe this may cause misoperation.
RCA Cable (option)
Remote-out
(Black)
Display Unit
CY-VM1500EX
(option)
Control Unit
CY-VM1500EX
(option)
(R) (Red)
(Yellow)
(L) (White)
(Yellow)
RCA Cable
(option)
(R) (Red)
(L) (White)
53
CX-DH801W
Advertisement
Table of Contents
