TABLE OF CONTENTS Before use ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 1 1.Components ・・・・・・・・・・・ ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 2 2.Options ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 2 3.How to extend the legs 4.Removal of the Middle Brace for TSA75 and TDA75 ・・・・・・・・・・・・・・・・・・ 3 5.How to attach Footpads and Floor Spreader ・・・・・・・・・・・・・・・・・・・・・・・・・・ 3 6.How to attach Mild Lever Spreader ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 4 ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・...
Before use Thank you very much for choosing SHOTOKU SH series Tripods. The SHOTOKU Corporation has designed your tripod to be a sturdy, rugged, dependable product that will provide you with many years of satisfactory use. Please take a few moments to read this operating instruction carefully before use so that you can take full advantage of your tripod many fine features.
2 Options MID-LEVEL SPREADER ML9 with FEET PADS FLOOR SPREADER FL9 MID-LEVEL SPREADER ML9 FOOT PAD 3 How to extend the legs Loosen the Leg Lock Lever and extend the legs. (Note) In case of the initial slack, a lever can be drawn out to the front if you remove a screw of a Leg Lock Lever.
4 Removal of the Middle Brace for Tripod TSA75 and TDA75 Middle Brace Screw When you attach the optional floor spreader and middle spreader, please remove the middle brace from the legs. The middle brace will remove from the legs by removing the right and left sides screws at the tip. Please remove three positions at the same way.
・Clean with a mild detergent and a soft cloth only. ・DO NOT use close to flame. Avoid extreme heat. SHOTOKU corporation reserves the right to make changes in design and/or improvements on the products without any obligation and advanced notice.
Need help?
Do you have a question about the TSA75-10 and is the answer not in the manual?
Questions and answers