Samsung Galaxy Tab S2 User Manual page 227

DHCP: Tap to enable or disable DHCP. When DHCP is enabled, your tablet assigns IP
o
addresses to devices that connect to Hotspot.
Starting IP: When DHCP is enabled, view the default starting IP address for assigning
o
IP addresses to connecting devices, or enter a enter a valid IPv4 address. When other
devices connect to your device using DHCP, the IP address your tablet assigns will be
between the Starting IP and Ending IP.
Ending IP: When DHCP is enabled, view the default ending IP address for assigning IP
o
addresses to connecting devices, or enter a enter a valid IPv4 address. When other
devices connect to your device using DHCP, the IP address your tablet assigns will be
between the Starting IP and Ending IP.
Lease time: When DHCP is enabled, set a length of time a connected device may use
o
an assigned IP address.
Maximum DHCP users: When DHCP is enabled, set the maximum number of devices
o
allowed to connect to your Hotspot.
Allowed Devices
Control whether devices can connect to your Mobile Hotspot with the Allowed devices list. After you
add devices to the list, they can scan for your tablet and connect using your tablet's Hotspot name
and password.
Note: Using the Hotspot feature consumes battery power and uses data services.
1. From home, tap Apps
Settings
> Settings .
219