Due to constant updating and improvements, some components may occasionally differ slightly from the images shown in these instructions. We reserve the rights to change the specifications of any products without prior notice. If you need any assistance please contact your Obaby retailer from whom you purchased your product, who will take appropriate action.
To fold the stroller, release the primary lock on the handle as shown in (fig.7). WARNING: Ensure that all locking devices are engaged before use Then push the handles forwards and down towards the front wheels (fig.8), until completely folded (fig.9). Engage the storage clip on the chassis (fig.10). www.obaby.co.uk www.obaby.co.uk...
To put upright, grip the sides of the toggle with one hand, and the strap with the other To put the wheel in swivel mode, push the lever down on the front of the wheel hand and slide the toggle up the strap to the desired height (fig.22). (fig.15 & 16). www.obaby.co.uk www.obaby.co.uk...
Higher holes for the shoulder strap and outer holes for the waist straps and crotch strap should be used when your child is of a suitable size. (See fig.A) WARNING: Always use the crotch strap in combination with the waist belt www.obaby.co.uk www.obaby.co.uk...
Fitting and removing the Bumper Bar Press fig. 38 fig. 39 fig. 40 To fit the bumper bar, align the bumper bar over the stroller frame at both sides, and clip on to frame (fig.38-40). To remove do the reverse of the above. www.obaby.co.uk www.obaby.co.uk...
Need help?
Do you have a question about the Tour and is the answer not in the manual?
Questions and answers