Honda 2010 fit automobile navigation manual (151 pages)
Summary of Contents for Honda SSD-NAVI
Page 1
TROUBLESHOOT PROCEDURE SSD-NAVI (version 3.00) 1- Contents Customer’s complaint Diagnostic Chap 2 Overview and Pinout Chap 3 General functional problem No Operating or no power-up (black screen): Chap 3-1 Button inoperative Chap 3-2 Touch-screen doesn’t work (correctly): Chap 3-3 CD mechanism problem...
Page 2
TROUBLESHOOT PROCEDURE SSD-NAVI (version 3.00) 2– Overview and Pinout: - Front View - - Rear View - - Page 2 of 8 -...
Page 3
TROUBLESHOOT PROCEDURE SSD-NAVI (version 3.00) 3– General functional problem: No Operating or no power-up (black screen): 3-1 : a) Check power supply C4-Pin 13 : 12V permanent C4-Pin 1 : Main GND C4-Pin 23 : 12V when key is ON...
Page 4
TROUBLESHOOT PROCEDURE SSD-NAVI (version 3.00) b) CD cannot be inserted/Loaded a. Confirm there is NO CD inside (indicator light). b. Disconnect unit and wait 10min before reconnect it. c. If problem remains, replace unit. 3-5 : Steering Remote Control problem : a.
Page 5
If the CD plays in another CD player, Reset the unit to factory setting.. e) If problem remains, replace unit. 4-7 : Bluetooth streaming problem : Try this procedure with compatible mobile phone see HONDA list Please check these points: a) Please pair correctly the phone (see 6-2).
Page 6
TROUBLESHOOT PROCEDURE SSD-NAVI (version 3.00) 4-8 : Aux Please check these points: a) Check with another device. b) Confirm that device plays normally when disconnect to unit. c) Change the audio input level d) Check and replace the device cable.
Page 7
TROUBLESHOOT PROCEDURE SSD-NAVI (version 3.00) 5-3_ GPS antenna reception a) Check the GPS antenna connection in Navigation system Check menu. b) Confirm and replace the GPS antenna. c) Drive a few minutes (20 min maxi) in area without building or mountain….
Page 8
TROUBLESHOOT PROCEDURE SSD-NAVI (version 3.00) 7– Electrical connection problem: 7-1_VSP Vehicle Speed pulse connection (speed) a) Check the Speed pulse signal in Navigation system Check menu. b) Speed pulse signal can be activate by driving forward/backward in a few meter...