Table of Contents
Advertisement
NAVIGATION
Entering a Destination
Using Voice Control
Press and release the Talk button before you give a command.
1. Say "Display menu" and "Address."
2. Say "Street," then say the street
name on the next screen. Do
not include the direction (N, S, E,
W) or type (St., Ave., Blvd., etc.).
3. A list of street names appears.
Say the number next to the
street you want to select.
NOTE: If menu options are grayed out, they are only available using
voice commands. However, they may be hard to see on screen. It is
recommended that you enter your destination before driving or
when the vehicle is stopped.
24
(if equipped)
4. Say the entire street address
number, followed by "OK" if
necessary. For example, "1-2-
3-4 OK."
5. If the street address is in more
than one city, a list of city names
appears. Say the number next to
the city you want to select.
6. The system calculates the route
and displays the "Calculate route
to" screen. Say "Set as
destination" to set the route.
Real-time navigation system uses GPS and a map database to show your current
location and help guide you to a desired destination.
Using the Find Nearest Command
Try these simple steps to find a nearby point of interest, such as a gas station,
movie theater, restaurant, etc.
Press and release the Talk button before you give a command.
1. Say "Find nearest ATM."
2. A list of the nearest ATMs in
your area is displayed by
shortest distance to destination.
Map Screen
Legend
Calculated route
Direction of destination
Distance to go
Time to go
Current vehicle
location
3. Say the number next to the
destination you want to select.
4. The system calculates the route
and displays the "Calculate
route to" screen. Say "Set as
destination" to set the route.
25
Advertisement
Table of Contents
