ENFORCER DC-200GQ Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

 Built-in GPS sensor

 1080p HD Video recording

 140° Wide viewing angle

 3MP CMOS Sensor

 WDR – Captures clear images even in

strong backlight

 2.7" 16:9 Widescreen display

 Can remove from mount and use as a camera

to take still images

*Micro SD card not included

All trademarks are the property of their respective owners.

DC-200GQ

Dashboard Camera

Manual

 F1.6 aperture for low-light performance

 Store images and video on micro SD card

(up to 32GB)*

 Exports as MOV format, HDMI output

 Auto start/stop recording

 G-Sensor for automatic file protection

 GPS Tracker logs camera location and speed

while recording

 Software playback with Google Maps™

Table of Contents

Need help?

Do you have a question about the DC-200GQ and is the answer not in the manual?

Questions and answers

Summary of Contents for ENFORCER DC-200GQ

Page 1 DC-200GQ Dashboard Camera Manual  Built-in GPS sensor  F1.6 aperture for low-light performance  1080p HD Video recording  Store images and video on micro SD card  140° Wide viewing angle (up to 32GB)*  Exports as MOV format, HDMI output ...
Page 2: Table Of Contents
Main Settings Menu ......... 12-13 Powering the Camera ........4 Viewing the Data on a Computer ....13 Turning the Camera On ........5 Installing the SL ENFORCER Dash How to Navigate the Dashboard Camera Player ..........14 Camera Menus ..........5 SL ENFORCER Dash Camera Video Mode ............
Page 3: Overview
ENFORCER Dashboard Camera Overview: Rear LED Power Indicator Fast Forward Menu File lock Exposure Microphone Mode Rewind Screen Front Speaker 1080P GPS Lens AV Out Power Mini USB Photo/Record port Sides Micro HDMI Reset SD Card button Slot SECO-LARM U.S.A., Inc.
Page 4: Mounting
ENFORCER Dashboard Camera Mounting: IMPORTANT Users and installers of this product are responsible for ensuring that the installation and configuration of this product complies with all national, state, and local laws. SECO-LARM will not be held responsible for the use of this product in violation of any current laws or codes.
Page 5: Turning The Camera On
ENFORCER Dashboard Camera Turning the Camera On: 1. If the camera is connected to power, whenever the ignition is turned on, the camera will automatically turn ON and begin recording. 2. If the camera is not connected to power, press the power button on the top of the camera.
Page 6: Video Setting Menu
ENFORCER Dashboard Camera Video Setting Menu: Wide Dynamic Range (WDR): This function is not programmable. WDR is always set to ON. Resolution: This function is used to set the camera’s resolution. The resolution settings are listed from highest to lowest. The lower the resolution, the less room a recording will occupy on the micro SD card.
Page 7 ENFORCER Dashboard Camera Video Settings Menu continued G-Sensor: This function is used to set the sensitivity level of the 3-Axis G-Sensor. If the camera experiences an impact, such as in an accident, the camera will lock the current recording to prevent deletion.
Page 8: Video Settings Menu
ENFORCER Dashboard Camera Video Settings Menu continued GPS Speed Warning: This function enables the camera to issue a warning to the drive once the driver hits a certain speed. 1. Select GPS Speed Warning on the video menu screen. 2. Select the desired setting. Units of each setting are determined by which speed units are programmed.
Page 9: Photo Mode
ENFORCER Dashboard Camera Photo Mode: The camera can also be used to take photos. In order to access the photo mode, do the following:  Look at the top of the screen. If the camera is in photo mode, the Photo icon photo icon will be at the top of the screen (see right).
Page 10 ENFORCER Dashboard Camera Photo Settings Menu continued Capture Mode: This function sets the delay before a photo is taken after the record button is pressed. 1. Select Capture Mode on the photo menu screen. 2. Select the desired setting. If “Single” is selected, a photo will be taken immediately.
Page 11: Playback Mode
ENFORCER Dashboard Camera Playback Mode: Playback mode is used to play recorded video directly from the camera:  Look at the top of the screen. If the camera is in playback mode, one Video Playback icon of the playback icons will be at the top of the screen (see right).
Page 12: Main Settings Menu
ENFORCER Dashboard Camera Main Settings Menu: The main settings menu contains settings that apply to the camera system-wide. 1. To access the main settings menu, press the menu button to access the menu screen. Depending on the current mode, either the video, photo, or playback menu will open.
Page 13: Viewing The Data On A Computer
ENFORCER Dashboard Camera Main Settings Menu continued Screen Saver: This function sets the amount of time the camera is idle before the screen saver turns on. 1. Select Screen Saver on the main settings menu. 2. Select the desired setting. (Off, 3 Minutes, 5 Minutes, 10 Minutes) 3.
Page 14: Installing The Sl Enforcer Dash Camera Player
ENFORCER Dashboard Camera Installing the SL ENFORCER Dash Camera Player: 1. Insert the included SL ENFORCER Dash Camera Player CD into the computer. NOTE: Software is also available for download on the SECO-LARM website. 2. Install the files from the CD onto the computer. Software will work on Windows XP and above or Mac OS 10.6.4 and above.
Page 15: Connecting The Camera Via Hdmi Cable
ENFORCER Dashboard Camera SL Dash Camera Player Overview continued Playback Controls: These controls are used to play, pause, fast-forward, and rewind the video. GPS Coordinates: These GPS coordinates show the location of the vehicle at the time the video was recorded.
Page 16: Troubleshooting
ENFORCER Dashboard Camera Troubleshooting:  Check that the camera battery is fully charged. Camera will not turn ON.  Make sure that the camera is not in mass storage mode.  Make sure that the camera is in video mode.