Advertisement
Quick Links
CAMERA SPECIFICATIONS (continued)
Supercam1
Weatherproofing
Overall size
Audio signal
Operating temperature
Power Supply
Input Voltage
Output Voltage
Output Current
Weatherproofing
2 Metre
Cable type
Camera Lead
Connectors
18 Metre Lead
Cable type
Connectors
Churchill Way, Lomeshaye Industrial Esate, Nelson, Lancashire BB9 6RT, England
Tel: (01282) 695500 Fax: (01282) 695511 Helpline: 09066 191 133*
Email: sales@voltek.co.uk Web site www.voltek.co.uk
*Helpline Calls Cost 60p/min Open 9am to 5pm Mon to Fri
Specifications subject to change without notice. Ó2004 Voltek Automation Ltd. Issue 2.3
IP54 (outdoors and indoors)
3.5" W x 4.3" H x 4.5" D
1V pk-pk into 47K Ω
-10ºC to +40
C
º
220V/240V ac 56/60 Hz
12V dc
300mA (max)
IP30 (indoor use only)
6 core alarm cable
6 pin mini-DIN socket
6 core alarm cable
6 pin mini-DIN socket
21 pin scart plug
6 way RJ11 plug
2.1mm power plug
INSTALLATION
SUPERCAM 1
External B&W Camera with PIR Sensor
External Colour Camera with PIR Sensor
External Day Night Camera with PIR Sensor and IR LEDS
Colour during the Day switching to B&W at Night
IR LEDs switching on at night to aid night vision
INSTRUCTIONS
CT120
CT121
CT122
Advertisement
Related Manuals for Voltek SUPERCAM 1 CT120
Summary of Contents for Voltek SUPERCAM 1 CT120
- Page 1 Churchill Way, Lomeshaye Industrial Esate, Nelson, Lancashire BB9 6RT, England Tel: (01282) 695500 Fax: (01282) 695511 Helpline: 09066 191 133* Email: sales@voltek.co.uk Web site www.voltek.co.uk *Helpline Calls Cost 60p/min Open 9am to 5pm Mon to Fri INSTRUCTIONS Specifications subject to change without notice. Ó2004 Voltek Automation Ltd. Issue 2.3...
- Page 2 GETTING THE BEST FROM YOUR SUPERCAM 1 (continued) The SuperCam1 is a combined camera and PIR detector with a built in microphone providing you the ability to ‘see’ outside your property using your own TV set. The IF THE SCART SOCKET IS IN USE OR THE PICTURE IS TO BE VIEWED ON MULTIPLE Keypad Remote Control supplied with the camera will sit neatly on top of your TV or TVS: CT210 Wideband RF Modulator...
- Page 3 There are two connection methods shown, choose the method that suits your USING THE SUPERCAM1 (continued) requirements the best. The sounder can be switched off by pressing CONNECTION METHOD 1 the sounder button. An LED on the Keypad Remote Control indicates if the sounder is If you are not using a VCR, connect the SuperCam1 to your TV as shown.
- Page 4 • 3. Select the AV input on your VCR . See HOW TO SELECT THE AV INPUT if you The camera will work in low light conditions, but ensure a light, such as a are not sure how to do this. 200W tungsten halogen lamp, is fitted near to the camera for good visibility at night-time.
Need help?
Do you have a question about the SUPERCAM 1 CT120 and is the answer not in the manual?
Questions and answers