Operation - RIDGID WD14800 Owner's Manual

operation

WARNING: to reduce the risk of fire, explosion, or damage to vac:
• Do not leave vac running while unattended - you may fail to notice
important signs indicating abnormal operation such as loss of suction,
debris/liquid exiting the exhaust, or abnormal motor noises. Immediately
stop using vac if you notice these signs.
• Do not leave vac plugged in when not in use.
• Do not continue running when float has cut off suction.
• sparks inside the motor can ignite airborne flammables. Do not operate vac
near flammable liquids or in areas with flammable gases, vapors, or
explosive/airborne dust. flammable liquids, gases, and vapors include:
lighter fluid, solvent-type cleaners, oil-based paints, gasoline, alcohol, and
aerosol sprays. explosive dusts include: coal, magnesium, aluminum,
grain, and gun powder.
• Do not vacuum up explosive dusts, flammable liquids, or hot ashes.
WARNING: to reduce the risk of electric shock or injury:
• Do not expose to rain or allow liquid to enter motor compartment. store
indoors.
• Do not handle plug, switch, or vac with wet hands.
• unplug vac before servicing. If your vac is not working as it should, has
missing parts, has been dropped, damaged, left outdoors, or dropped into
water, return it to an independent service center or call customer service.
• When using an extension cord, use only outdoor-rated cords that are in
good condition. Do not allow the connection to come into contact with
liquid.
To reduce the risk of electric shock, this
Vac has a polarized plug (one blade is
wider than the other). This plug will fit in
a polarized outlet only one way. If the
plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install
the proper outlet. Do not change the
plug in any way.
After you plug the power cord into the
outlet, turn the unit on by sliding the
switch from position "O" to position "l":
= off
Familiarize yourself with the accessories
included with the Vac. Each accessory
may be used in various ways for
vacuuming and blowing debris. Here is a
list of the accessories and their uses.
= oN
9
extension Wands - These wands can be
connected together and provides
additional length for more reach.
utility Nozzle - General purpose nozzle
for most vacuuming applications.
car Nozzle - Dry pickup nozzle for car
interiors and most upholstery cleaning.
Wet Nozzle - Used for wet pickup on
smooth surfaces to pick up liquid and dry
the surface in one stroke.
Blower Wand - Attaches directly to the
power assembly concentrates the air for
blowing applications.
Dual-flex™ locking hose - Provides
transfer of vacuum or blowing capability
to work site. Provides the means of
attaching extension wands and nozzles.
Accessory storage holder - Store all
the accessories with your Vac.