Troubleshooting - Panasonic GP-VD150E Operating Instructions Manual

Troubleshooting

q Operation
p
Symptom
No power
Cannot operate
( common to
wireless remote
controller, HD Visual
Communication Unit)
Cannot operate using
the wireless remote
controller
Cause and remedial action
p p Is the AC adapter securely connected to the AC outlet?
p p Is the power plug of the AC adapter connected properly?
p p When the unit is being operated by the wireless remote controller
 Also refer to the "Cannot operate using the wireless remote
controller" item.
p p Is the power on?
 If the unit's status display lamp is off or if it has lit up orange,
it means that the unit's power is not being supplied.
p p Has the correct unit to be operated been selected?
p p Have the remote control's batteries run down or have the batteries
been installed with their polarities reversed?
 If the status display lamp does not blink even when the wireless
remote controller is operated near the wireless remote controller
signal light‑sensing area, it means that the batteries have run down.
Replace the batteries.
p p Is there a fluorescent light or plasma monitor near the unit and,
if so, is the wireless remote controller signal light-sensing area
exposed to its light?
21 (E)
Reference
pages
–––
–––
–––
<Operations and
Settings>
<Operations and
Settings>
–––
P.12