Keep work 19.Check damaged parts. area well lit. Do not use power tools in presence of Before further use of the tool, a guard or other part flammable liquids or gases. Ferm Ferm...
SPARE PARTS TECHNICAL SPECIFICATIONS mine that it will operate properly and perform its REF.NR. DESCRIPTION FERM NR. intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, 407820 POWER SWITCH mounting, and any other conditions that may affect its...
Fasten the machine with bolts. If the frame is used, it must be fixed on the floor with four screws and the machine must be fixed on the frame with four screws. Check the screws before switching the machine on Ferm Ferm...
Page 5
5 mm at the depth of cut set. The tip of the riving knife shall not be lower than 5 mm from the tooth peak, as shown. Ferm Ferm...
Take all the necessary safety measures and continually Sawing the workpiece in the length of the wood grain. The Ferm machines have been designed to operate over push the workpiece through (until behind the saw blade) 1 THE MOTOR DOES NOT START Cross-cutting or cutting off a long period of time with a minimum of maintenance.