Table of Contents
Advertisement
digital output Selection
Setup
PCM
Connection
HDMI Receiver
PCM
Up to 7.1ch
Dolby Digital
PCM 2ch
Dolby Digital Plus
PCM 2ch
Audio Stream
on Blu-ray
Dolby TrueHD
PCM 2ch
Disc
DTS
PCM 2ch
DTS-HD High
PCM 2ch
Resolution Audio
DTS-HD Master
PCM 2ch
Audio
PCM
PCM 2ch
Audio Stream
Dolby Digital
PCM 2ch
on DVD
DTS
PCM 2ch
Decodes main feature
audio and BONUSVIEW
Definition for
audio stream together
Any
Blu-ray Disc
into PCM audio and
add Navigation Sound
Effects.
* If Source Stream is 2ch, "Re-encoded Dolby D" Settings are not applied.
Blu-ray Discs may include three audio streams :
- Main Feature Audio : The audio soundtrack of the main feature.
- BONUSVIEW audio : An additional soundtrack such as the director or actor's commentary.
- Navigation Sound Effects : When you choose a menu navigation selection, a Navigation
Sound Effect may sound. Navigation Sound Effects are different on each Blu-ray Disc.
02520A_BD_H4500_ZK ENG.indd 11
Downloaded from
www.Manualslib.com
Bitstream
Bitstream
(Unprocessed)
(Re-encoded DTS)
HDMI Receiver
HDMI Receiver
PCM
Re-encoded DTS
Dolby Digital
Re-encoded DTS
Dolby Digital Plus
Re-encoded DTS
Dolby TrueHD
Re-encoded DTS
DTS
Re-encoded DTS
DTS-HD High
Re-encoded DTS
Resolution Audio
DTS-HD Master Audio
Re-encoded DTS
PCM 2ch
PCM 2ch
Dolby Digital
Dolby Digital
DTS
DTS
Outputs only main
Decodes main feature
feature audio stream
audio and BONUSVIEW
audio and BONUSVIEW
so that your AV
audio stream together
receiver can decode
into PCM audio
the audio bitstream.
and add Navigation
You will not hear
Sound Effects, then
BONUSVIEW audio
re-encodes the
and Navigation Sound
PCM audio into DTS
audio into Dolby Digital
Effects.
bitstream
manuals search engine
NotES
✎
` Be sure to select the correct Digital Output or
you will hear no sound or just loud noise.
Bitstream
(Re-encoded Dolby D)
` If the HDMI device (AV receiver, TV) is not
HDMI supported AV
compatible with compressed formats (Dolby
receiver
Digital, DTS), the audio signal outputs as PCM.
` Regular DVDs do not have BONUSVIEW audio
Re-encoded Dolby
Digital *
and Navigation Sound Effects.
` Some Blu-ray Discs do not have BONUSVIEW
Re-encoded Dolby
Digital *
audio and Navigation Sound Effects.
` If you play MPEG audio soundtracks, the audio
Re-encoded Dolby
Digital *
signal outputs as PCM regardless of your
Digital Output selections (PCM or Bitstream).
Re-encoded Dolby
Digital *
` If your TV is not compatible with compressed
multi-channel formats (Dolby Digital, DTS), the
Re-encoded Dolby
player may output PCM 2ch downmixed audio
Digital *
even though you selected Bitstream (either Re-
Re-encoded Dolby
encoded or Unprocessed) in the setup menu.
Digital *
` If your TV is not compatible with PCM sampling
Re-encoded Dolby
rates over 48kHz, the player may output 48kHz
Digital *
downsampled PCM audio.
PCM 2ch
dynamic Range Control
Dolby Digital
DTS
Lets you apply dynamic range control to
Dolby Digital, Dolby Digital Plus, and Dolby
Decodes main feature
True HD audio.
audio stream together
• Auto : Automatically controls the dynamic
into PCM audio and
range of Dolby TrueHD audio, based
add Navigation Sound
on information in the Dolby TrueHD
Effects, then re-
encodes the PCM
soundtrack.
Also turns dynamic range control on for
bitstream
Dolby Digital and Dolby Digital Plus.
• off : Leaves the dynamic range uncompressed,
letting you hear the original sound.
• on : Turns dynamic range control on for
all three Dolby formats. Quieter sounds
are made louder and the volume of loud
sounds is reduced.
downmixing Mode
Lets you select the multi-channel downmix
method that is compatible with your stereo
system. You can choose to have the player
downmix to normal stereo or to surround
compatible stereo.
System Settings
Initial Settings
By using the Initial Settings function, you can
set the language, etc.
For more information about the Initial Settings
function, refer to the Initial Settings section of
this user manual (See page 9).
Quick Start
You can turn on the power quickly by
decreasing the boot time.
NotES
✎
` If this function is set to On, Standby power
consumption will be increased.
Anynet+ (HdMI-CEC)
Anynet+ is a convenient function that offers
linked operations with other Samsung players
that have the Anynet+ feature.
To operate this function, connect this player to
an Anynet+ Samsung TV with an HDMI cable.
With Anynet+ on, you can operate this player
using a Samsung TV remote control and start
disc playback simply by pressing the pLAy
(
) button on the TV's remote control.
For more information, please see the TV user
manual.
8/13/14 10:50 AM
11
Advertisement
Chapters
Table of Contents
