Connections - Sandstrom SHDFSAT14 User Manual

CONNECTIONS

Ensure your TV is switched off at the mains supply.
1. Connect the HDMI cable supplied to the HDMI socket at the back of the Freesat box and a HDMI
socket on your TV. There may be more than one HDMI socket on your TV. If you are not sure
which one to use, check the TV's instruction manual.
2. If your TV set does not have a HDMI connection you can connect the SCART connection on the TV
to the TV SCART socket on the Freesat box.
When using SCART connections, high definition channels will only be available in Standard Definition.
3. If you connect an RCA phono lead between the S/PDIF socket on your Freesat box and digital
sound system, you can listen to the TV sound in digital audio quality, or even in surround sound,
depending on the sound system used and the broadcast chosen.
ON DEMAND TV
4. If you want to watch On Demand TV, connect a network cable from the Ethernet network socket
on the back of the Freesat box to either your broadband modem/router or a network switch
in your home network, as appropriate. Consult your modem/router's instruction manual for
guidance.
5. Connect the mains cable to the back of the Freesat box, plug into the mains and switch on.
If you require additional assistance please call our UK Call Centre on 0344 561 1234. Our UK
Customer Contact Centre is open Monday-Saturday 8am-8pm and Sunday 8am-6pm.
SHDFSAT14_IB.indd 8
350mA 350mA
TUNER 2 TUNER 1
4
350mA 350mA
S/PDIF
ETHERNET
8
3
5V 500mA
S/PDIF
ETHERNET TV SCART
DC 12V 2.0A
1
2
TV SCART DC 12V 2.5A
5
13/08/2014 10:35