Panasonic CF-28 series Operating Instructions Manual page 11

8
Setup Windows
Moving the cursor ( ) or clicking buttons can be performed with the touch pad.
Windows 98
Select settings for your region and your keyboard layout, then press [Next].
1
(for U.S.A.: United States 101)
Enter your name, then press [Next].
2
Select [Skip] at the [Using Your Modem to Connect].
3
Select [Yes] at the [Cancel Dialing], then press [Next].
4
The License Agreement will be displayed.
After reading the agreement, select [I accept this agreement] or [I do not accept
5
the agreement], then press [Next].
NOTE
If [I do not accept the agreement] is selected, the Windows setup will be aborted.
<During the setup procedure after reinstalling only>
After accepting the agreement, the [Windows Product Key] is displayed.
Input the Product Key written down in the "Customer's Record" section, then
press [Next]. ( page 9 step 2 )
Press [Finish].
6
Input the correct date, time and time zone and press [Close]. You can also com-
7
plete these settings at a later time.
If the cursor can not be pointed correctly with your finger, perform [Calibration]
in [Start]-[Settings]-[Control Panel]-[Mouse]-[TouchScreen].
Windows NT
The License Agreement will be displayed. After reading the agreement, select [I
1
accept this Agreement].
NOTE
If [I don’t accept this Agreement] is selected, the Windows setup will be aborted.
Select [Next].
2
Input your name and organization, then select [Next]. (It is possible to omit the
3
organization item.)
Input your computer name and select [Next].
4
Input an Administrator password and select [Next].
5
CAUTION
Remember this password! If the password is forgotten, Windows NT cannot be
operated.
Select [Finish]. Windows will restart.
6
Following the display, press Ctrl + Alt + Del . Input the password set in
7
step and select [OK], then select [Close] at the [Welcome] display.
5
As the computer starts up, it will be necessary to input the password set in step
Set the correct settings for all items in [Control Panel]-[Regional Settings] and
8
[Date/Time] etc.
If the cursor can not be pointed correctly with your finger, perform [Calibration]
in [Start]-[Settings]-[Control Panel]-[Mouse]-[TouchScreen].
.
5
(To next page)
11