Page 1
The AV-950 system is a perfect solution to extend high resolution AV-950 HDMI, USB, and optional IR/RS-232 over IP network. It includes an AV-950T transmitter and an AV-950R Receiver. The AV-950T transmitter connects with PC or any device with HDMI source. The AV-950R receiver connects to HDMI display, speaker, microphone, HDMI with USB USB devices (Keyboard/Mouse/Storage/…) and RS232 devices.
Page 2
Loop-back Link ID. Switch video to Remote or Short press Loopback monitor. 7 Gigabit Ethernet Connects to Gigabit switch or directly to AV-950R Output video to both Remote 8 RS-232 Control Long press and Loopback monitors. Provide Serial-over-IP function. 2 (Button 1)
Page 3
AV-950R receiver For remote USB devices, such as USB 4 USB Host KB/Mouse, storage, audio, … 5 IR Rx (optional) Remote Universal IR receiver. 6 Remote Power Provide Remote Power On/Off function. On/Off (optional) Switch to Video or Graphic Short press...
Page 4
Please follow the following procedures to install Multi-Cast AVK-950: speak/microphone … to the AV-950R’s 4 USB-A ports. Please note that you will need DC 5V with 4A power adapter if all of AV-950R’s 4 1. Make sure the Link-ID both of AV-950T and AV-950R are having the USB ports are used.
Need help?
Do you have a question about the AV-950R and is the answer not in the manual?
Questions and answers