Adjusting The Picture Position; Correcting Distortion; Adjusting The Volume; Temporarily Turning Off The Screen And Audio Output - Dukane 8230W User Manual

Focusing
Use the focus ring to focus the picture.
Selecting an aspect ratio
Each time you press the ASPECT button on
the remote control, it switches the aspect
ratio of the image, in turn.
Zooming
Use the D-ZOOM + and D-ZOOM - buttons
on the remote control to adjust the screen size.

Adjusting the picture position

After pressing the POSITION button on the remote control, use the ▲, ▼,
◄ and ► buttons. Press the POSITION button again to finish this operation.

Correcting distortion

Press the KEYSTONE button on the remote control. A dialog will appear on the
screen to aid you in correcting the distortion.
Use the ◄/► cursor buttons for keystone correction.

Adjusting the volume

Use the VOLUME +/- buttons to adjust the volume.

Temporarily turning off the screen and audio output

Press AV MUTE button on the remote control.
The BLANK screen will be displayed instead of the screen of input signals and
the sound from the AUDIO OUT port will be muted.
WARNING ►If you wish to have a blank screen while the projector's lamp
is on, use the AV MUTE function (see the Operating Guide).
Blocking the beam by something causes high temperature and could result in
fire or smoke.
INPUT IWB CALIBRATION
ASPECT AUTO ACCENTUALIZER HDCR
D-ZOOM
-
PAGE MAGNIFY MYBUTTON VOLUME
UP ON
1
DOWN OFF 2
KEYSTONE TEMPLATE FREEZE AV MUTE
ESC MENU
ENTER
POSITION RESET
12
FOCUS ring
ASPECT button
D-ZOOM - button
+
D-ZOOM + button
＋
VOLUME +/- button
ー
AV MUTE button
KEYSTONE button
POSITION button