Table of Contents
Advertisement
from the inside of the load
compartment.
Close the cover and engage.
Light assembly in the tailgate
1. Open the tailgate and remove the
cover and both blind cover on the
respective side.
2. Unscrew and remove three
screws.
3. Remove the light assembly. Make
sure that the cable duct remains in
position.
4. Press the retaining lug and
remove the bulb carrier from the
light assembly.
5. Remove and replace the bulb by
withdrawing or pushing the bulb
Vehicle care
slightly into the socket and
rotating anticlockwise:
Tail light (1)
Rear fog light/Reverse light (2),
depending on the side.
6. Insert the bulb carrier into the tail
light assembly. Fit light assembly
on the tailgate and tighten the
screws from the inside. Attach all
covers.
4-door notchback
1. Remove cover on the responding
side.
249
Advertisement
Chapters
Table of Contents
