Advertisement
GIRA
Voice-control
Info
Installation Instructions
Electrical features of the parallel inputs:
CMOS input; 100 kΩ pull up at 5 V; 1 kΩ serial resistance;
Protection diode against chassis
Input voltage:
Input current:
Peak:
Keyboard interface
External operating elements can be connected through the keyboard interface.
Jack 2.5 mm X54
Loudspeaker and microphone sockets
An external loudspeaker can be connected at this interface. In addition, the integrated microphone can
be replaced by an external microphone at this interface. A headset can also be connected at this
interface.
Jacks 3.5 mm, X54
Display
LCD character display with 4 lines of 20 characters each, background lighting LED green
Power supply
The Voice-control can be powered by batteries, accumulators, or from the mains.
2 x AA (Mignon) cells, alkaline manganese batteries or NiCd accumulators (600 mAh). The power
supply unit serves simultaneously as a charger when using NiCd accumulators, without having to
remove the accumulators. During battery operation, charging is blocked by a switch.
Dimensions, weight
Height x width x depth
Weight:
Scope of Delivery and Accessories
Scope of delivery
Remote control SICARE pilot
♦
Charger holder with base
♦
Plug-in power supply unit
♦
Cable for connection to PC
♦
Configuration software on a floppy disk
♦
Operating manual
♦
Accessories (not supplied with the above)
Tripod
♦
Infrared scanner
♦
External keyboard
♦
External microphone
♦
External loudspeaker
♦
Headset (headphones with microphone)
♦
Suck/blow switch
♦
Relay box AC (4x)
♦
Relay box DC (10x)
♦
• Socket-outlet box (4x)
Voice-control
min. -0.3 V; max. 40 V
typ. -40 µA
min. 3 V Trough: max. 0.4 V
184 x 72 x 44 mm
270 g
06/97
Page 5 of 6
Advertisement
