Advertisement
Quick Links
Advertisement
Summary of Contents for media-tech MT4218
- Page 1 WLAN REPEATER MT4218 Quick Guide...
- Page 2 Overview We recommend configuration via LAN with manual IP setting as shown below. Reset hole 1. Open local network property Status LEDs LAN socket Configuration Management is done via web browser, device is responding at address 192.168.2.1, default 2. Select “TCP/IP” protocol and click “Proper- user: admin, default password: admin.
- Page 3 Now open your web browser and enter http://192.168.2.1 If prompted enter default user name (admin) and pass- word (admin). Click “OK” and close network properties. If you want to extend your local WiFi network select op- tion “Repeater”. Next click “Scan” to search available WiFi networks.
- Page 4 Select desired network, if prob- lem with difference in broadcast channel occur – following win- dows will appear. Click “OK” on both windows in order to set the same channel of broadcast when you use repeater mode.
- Page 5 Now enter password for WiFi network you want to extend. Default name and password of re- peater WiFi can be edited by user. Enter password Click “Save/Apply” and wait until new setting will be stored. Device will reboot automati- cally.
- Page 6 Now you can connect to new WiFi network Configuration is done. “7Links-Repeater”. Go to wireless network and click “refresh network list”. Changing password for management website Select “7Links-Repeater” and enter password (default: 12345678). Enter new password.
-
Page 7: Repeater Mode
“obtain IP address automatically”, DHCP tion and appearance of product are subject to function in your router will assign IP and for- change without prior notice. For technical sup- ward DNS address so you will access local and port please visit www.media-tech.eu. Internet network.
Need help?
Do you have a question about the MT4218 and is the answer not in the manual?
Questions and answers