Setting Up Your Humidifier - Honeywell HUT-300 Series Important Safety Instructions Manual

SETTING UP YOUR HUMIDIFIER

Remove from box
Remove packaging material. Set aside instruction
manual. Recycle packaging materials or save for storage.
Extend Power Cord
Remove twist tie from power cord and extend power
cord to full length. DO NOT OPERATE WITH POWER
CORD COILED OR THE TWIST TIE IN PLACE
Placement
Select a firm, level location at least 12" (30 cm) from any
walls. Place the humidifier on a water-resistant surface.
Kaz will not accept responsibility for property damage
caused by water spillage.
Filling
Remove water tank by grasping
handle and lifting straight up.
NOTE: TANK SHOULD BE CARRIED USING TWO HANDS.
ONE HAND USING CARRYING HANDLE LOCATED ON TANK'S
TOP AND OTHER HAND SHOULD SUPPORT THE BASE OF THE TANK.
4
Turn tank over and unscrew tank
cap located on bottom of tank
Fill tank with cool water.
DO NOT USE HOT WATER.
Replace Tank Cap and place
tank back on base.
Refilling
If mist is no longer coming out
and water tank is empty, turn the
Power Switch to the OFF position.
Unplug the humidifier. Follow
filling and operating instructions
to restart humidifier.