InSinkErator LC-50 Installation Manual page 7

11
Backup Ring
Mounting Ring
Insert fiber gasket, backup ring and mounting ring. Hold
in place while inserting snap ring.
13
Tighten screws evenly and firmly against backup flange.
Use shorter 1-1/8" screws if sink is more than 3/8"thick.
OPTIONAL: DISHWASHER OR DIRECT WATER CONNECTION ONLY
If you do not need to attach the dishwasher or direction water connection, go to step 16.
14
Turn disposer onto side and insert screwdriver into
dishwasher inlet.
Installing the Disposer
Fiber Gasket
< 3/8"
1-1/2"
> 3/8"
1-1/8"
12
Optional
Place a weight such as the disposer on the sink flange
to hold it in place. Use a towel to prevent scratching
sink. Pull snap ring open and press firmly until it snaps
into place.
15
Knock out drain plug and remove plug from inside
of disposer.
7