Am/fm weather band clock radio with weather alert (14 pages)
Summary of Contents for First Alert SFA1150
Page 1
AM/FM WEATHER BAND CLOCK RADIO WITH S.A.M.E. WEATHER ALERT USER MANUAL SFA1150 PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN IT FOR FUTURE REFERENCE...
Page 2
DEAR FIRST ALERT® CUSTOMER Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference.
COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
TELESCOPIC ANTENNA SPEAKER ALERT INDICATOR RING BATTERY COMPARTMENT WARNING ALERT INDICATOR 17 AUX-IN Jack WATCH ALERT INDICATOR 18 DC-IN Jack ADVISORY ALERT INDICATOR 19 LOW BATTERY INDICATOR MENU Button 20 ALERT INDICATOR SELECT / MEMORY/MEM+ Button 21 WEATHER RADIO MODE INDICATOR MOVE LEFT / TUNE- Button...
Page 7
If you are using a universal adaptor with an output polarity switch or polarized plugs, be sure to set the polarity of the center plug to positive "+". BATTERY OPERATION 1. Open the Battery Door on the bottom of the radio. 2.
CHANGE DISPLAY BACKLIGHT S S ETTING THE LCD BACKLIGHT Press the MENU button, and “TIME” is shown on the display. Tap the button until “DISPLAY BACKLIGHT” is showing on the display. Tap the SELECT button to show the current BACKLIGHT setting. Tap the button to choose “HIGH”, “MIDDLE”...
Wake to ALARM, FM, AM or WEATHER RADIO 1. The Alarm (or FM, AM, Weather radio) will automatically turn on when alarm time is reached. The volume level of the Alarm (or FM, AM, Weather radio) increases gradually until it reaches the factory preset level. The Alarm (or FM, AM, Weather radio) sounds for 30 minutes and then turn off automatically if the SNOOZE or MENU buttons are not pressed.
HINTS FOR BEST RECEPTION: - The AM antenna is located inside the cabinet of the unit. If AM reception is weak, change the position of unit until the internal antenna picks up the strongest signal. - To insure maximum FM tuner reception, the Telescopic Antenna should be fully extended and rotated to obtain the best possible station reception.
Page 11
HINTS FOR BEST RECEPTION: - To insure maximum weather band reception, the Telescopic Antenna should be fully extended and rotated to obtain the best possible station reception. Note: 1.) The radio will continue to drain the battery if it's left in Weather Standby Mode, so it is highly recommended that you use AC adaptor(included) to prevent the battery from completely draining and turning the radio off while in use.
Page 12
• PROGRAMMING YOUR S.A.M.E. COUNTY CODES The SFA1150 Weather Alert Radio is preset to receive “ANY” alerts and transmissions that are broadcast. If you want to receive all the alerts that are broadcast by NOAA, leave the “COUNTY” setting on “ANY”. For more options, follow the menu selections below.
Page 13
5. Tap the SELECT button to save your “SINGLE” county code, then tap the MENU button to exit. 6. The SFA1150 will only alert you when there is a warning/watch/advisory for the one county you entered the S.A.M.E. code for, as long as it is within the area covered by the NOAA broadcast you are monitoring.
Page 14
“DISPLAY” Alert = No audible sound will be heard when an alert is received, and only a text alert will scroll on the display. EXCEPTION: When the SFA1150 is set to “DISPLAY” Alert, the alert tone siren will still sound if one of the alerts marked with an asterisk “ * ” on the “SELECTABLE ALERT REFERENCE CHART”...
Page 15
DISABLE that alert. When disabled, the SFA1150 will ignore Special Marine Warnings that are broadcast by NOAA. See the “SELECTABLE ALERT REFERENCE CHART” section in this manual for a list of the pre-defined events loaded in this radio.
Page 16
7. After successfully saving an event code “-- -- -- -- -- -- -- --“ is displayed and the first character space will start blinking for programming a user defined event code description up to 11 characters in length. Refer to step 5 above to name the event with up to 11 characters.
Page 17
Event Code Event Description Level Default Volume Default Enable/Didable Flood Watch Watch High ENABLE Flood Statement Advisory ENABLE Flood Warning Warning High ENABLE Fire Warning Warning High ENABLE Flash Freeze Warning Warning High ENABLE Freeze Warning Warning High ENABLE Hurricane Statement Advisory ENABLE Hazardous Materials Warning...
L L OAD DEFAULT If you forget some of your settings or want to clear all your previous settings, you may need to go through a “LOAD DEFAULT” procedure to reset the SFA1150 back to its factory settings. 1. Press the MENU button, and “TIME” is shown on the display.
Notes: • If you connect this unit to the Line-Out Jack of your external device, then you only need to adjust the volume control of this unit. If you connect this unit to the Headphone Jack of your external device, you may need to adjust both the volume control of your external device and the volume control of this unit to find the most desirable volume setting.
Page 21
This product is manufactured, distributed or sold by SPECTRA MERCHANDISING INTERNATIONAL, INC., official licensee for this product. All right, title and interest to use the “First Alert” logo trademarks and the “First Alert” trade dress are exclusively licensed by BRK Brands, Inc. and are used under license from BRK Brands, Inc..
Page 22
It is recommended that you contact SPECTRA first at 1-800-777-5331 or by e-mail at custserv@spectraintl.com for updated information on the unit requiring service. In some cases the model you have may be discontinued and SPECTRA reserves the right to offer alternative options for repair or replacement.
Need help?
Do you have a question about the SFA1150 and is the answer not in the manual?
Questions and answers