Miele FN 11827 S Operating And Installation Instructions page 43

^ Screw hinge plate f into position on
the opposite side using the two outer
long slots only. To make it possible to
align the door later, do not replace
the centre screw at this stage.
^ Refit hinge pin a together with disc
b. Important. The notch at the
bottom of the hinge pin should face
towards the back.
^ Place the door onto hinge pin a.
^ Close the appliance door.
Changing the door hinging
^ Fit hinge plate c onto the opposite
side and secure it with screws d.
^ Fit covers a and b to their opposite
sides.
^ Realign the door with the appliance
housing again if necessary using the
long slots in the lower hinge plate.
Then tighten the screws.
43