1. Unpacking the speaker
Carefully unpack your new Envaya Mini speaker and verify
that you have the following items.
NOTE
USB to AC power adapter not included.
1
2. Charging the speaker
q Open the cap on the left side.
w Connect the small end of USB cable to the speaker.
e Connect the large end of the USB cable to a USB to AC
power adapter and a power source or the USB port on
your computer.
q
NOTE
• The rating of adapter should be less than DC 5 V, 2.4 A.
• Must be used with an approved adapter suitable for the countries where
the requirement will be applied.
Green:
70 – 100%
w
Orange:
30 – 69%
Red:
1 – 29%
e