Advertisement
Quick Links
PC G
C
RAPHICS
ARD
AGP version: GC- K2A-64
PCI version: GC- K2P-64
with Windows 95, 98, ME, NT4, 2000, XP driver software
for 16:9, 16:10, 2:1 wide-screen and 4:3 resolutions
I
G
& U
M
NSTALLATION
UIDE
SER
ANUAL
Imagine Graphics Ltd
14 Alban Park, Hatfield Road, St. Albans, AL3 6EN, England
Tel: +44 (0)1727 844744
Fax: +44 (0)1727 811660
e-mail: sales@imaginegraphics.co.uk Web Site: www.imaginegraphics.co.uk
Pixel Perfect is a trademark of Imagine Graphics Ltd
Advertisement
Summary of Contents for Imagine Graphics PIXEL PERFECT GC-K2A-64
- Page 1 & U NSTALLATION UIDE ANUAL Imagine Graphics Ltd 14 Alban Park, Hatfield Road, St. Albans, AL3 6EN, England Tel: +44 (0)1727 844744 Fax: +44 (0)1727 811660 e-mail: sales@imaginegraphics.co.uk Web Site: www.imaginegraphics.co.uk Pixel Perfect is a trademark of Imagine Graphics Ltd...
- Page 2 With special Windows 95, 98, ME, NT4, 2000 and XP drivers for wide-screen plasma, LCD and CRT displays. Use these procedures when installing a Pixel Perfect PowerVR based graphics card and drivers from Imagine Graphics with wide-screen and 4:3 resolutions. For Windows 95/98/ME the drivers are designed to work with Microsoft’s DirectX software version 7 and above.
-
Page 3: Windows Me
• ‘Browse’ to the location of the driver files on the CD ROM, ensuring to select the folder labelled Win9x. • Windows should then select the “Imagine Graphics wide-screen driver” .inf file for you. • Restart your system. After the system has restarted, you can go back into the Display Properties applet and select your preferred 16:9 or 4:3 screen resolution, refresh rate and colour depth. - Page 4 • ‘Browse’ to the location of the driver files on the CD ROM, ensuring to select the folder labelled Win9x. • Windows should then select the “Imagine Graphics wide-screen driver” .inf file for you. • Restart your system. After the system has restarted, you can go back into the Display Properties applet and select your preferred wide-screen or 4:3 screen resolution, refresh rate and colour depth.
-
Page 5: Windows Xp
• Select the file ‘GC-K2-64.inf’ and then click ‘OK’. • You may safely click ‘Yes’ and ‘Next’ to continue the installation as Windows 2000 presents a series of dialog boxes asking you to confirm your selection. • Restart your system. •... - Page 6 • Click ‘Have Disk’ and then ‘Browse’ to the location of the driver files on the CD ROM, ensuring to select the folder labelled NT4- Win2k-XP. • Select the file ‘GC-K2-64.inf’ and then click ‘OK’. • Click OK to install the driver. •...
- Page 7 Rotation Built in driver rotation is available under Windows XP, 2000 and NT4, on Windows 95, 98 and ME the rotation controls will not be available. In order to rotate the display, select the required rotation degree radio button and click apply. This facility is provided to support panels mounted in a portrait orientation.
- Page 8 Image retention or phosphor ‘Burn’ (pixel element over use) is caused by displaying static images for medium or long intervals on plasma displays or CRTs (not applicable to LCD/TFT). The effect of this can be reduced by using the Orbiter but if permanent burn or short term Image Retention is affecting your panel the Pixel Perfects’...
- Page 9 By default the Pixel Perfect display driver detects whether there is a panel attached to the DVI output at start-up to determine whether DVI output is enabled. This can result in no DVI image being transmitted if the connector is attached after start-up or if the cable is routed through a signal booster or optical cable.
Need help?
Do you have a question about the PIXEL PERFECT GC-K2A-64 and is the answer not in the manual?
Questions and answers