Samsung SMT-i6010 User Manual page 85

Deskphone Connection setting
Setting for deskphone connection. You can check or uncheck auto re-connection, and
manually register FMC number. If you have FMC nuber, it is registered automatically
and can not modify. And SDM can be cancelled restration from Deskphone.
Deskphone incoming call notification
Setting for deskphone incoming call notification. Depending on the notification
window check/uncheck, a notification bar is displayed when there is an incoming call.
You can set up screen off status, sound, or vibration, etc. Based on this setting.
This function may not supported depending your system.
SDM shortcut
If you select this when the SDM is registered to the deskphone, the SDM shortcut
notification is registered to the notification bar.
Application info
Check the application information. You can do upgrade and NFC simple setting.
Smart CID
If you enabled Incoming call notification in Settings, the Smart CID is working
whenever there is an incoming call to the deskphone. When you press the Close
button (X), it is not displayed on the screen but it still remains in the notification bar.
Therefore, you can load it anytime. You can accept or reject a call.
When you accept a call, it is connected through the Samsung Mobile VoIP app.
83
SMT-i6010/6011 User Guide _