Table of Contents
Advertisement
4.
KEYPAD
You can use the keypad instead of the remote control unit to operate the on-screen
display (OSD) controls. The keypad operates as follows:
On/Standby (
)
Press once to toggle from standby mode to on mode. Press it again to return to standby mode.
SOURCE
To select a source, press the SOURCE button repeatedly (with no menus visible on-screen).
When a menu is visible on-screen, this button operates identically to the right-arrow (or ENTER)
button on the display remote control unit.
When a menu is visible on-screen, this button operates identically to the left-arrow button on
the
display remote control unit.
/
When a menu is visible on-screen, these buttons operate identically to the up-and down-arrow
buttons on the display remote control unit.
MENU/ EXIT
Press this button to access the on-screen display (OSD) controls, or to exit the current menu and return to the
previous one.
16
Advertisement
Table of Contents
