Maintenance - Axial Yeti XL Instruction Manual

Maintenance

Just like a full size car or truck your RC vehicle must undergo periodic maintenance in order to ensure peak running performance. Preventative
maintenance will also help avoid needless breakages which could result in costly repairs. Below are some suggestions to properly maintain
your vehicle.
REPLACE ANY NOTICEABLE
BENT OR BROKEN PARTS
CHECK WHEEL NUTS MAKING
SURE THEY'RE SNUG
CHECK SLIPPER CLUTCH IF
APPLICABLE, FOR PROPER
OPERATION
CHECK FOR WEAR ON
THE BALL JOINTS IN THE CHECK DRIVESHAFT SET
STEERING AND SUSPENSION SCREWS AND RE-THREAD
LINKS (REPLACE IF NECESSARY) LOCK IF NECESSARY
CHECK TIRES MAKING SURE
THE BEADS ARE STILL FIRMLY
BONDED TO THE ENTIRE KEEP CHASSIS FREE OF DIRT
CIRCUMFERENCE OF THE RIM OR DEBRIS
CHECK RECEIVER ANTENNA
TO CONFIRM IT'S NOT CHECK STEERING
DAMAGED OPERATION FOR ANY BINDS
INSPECT SHOCK
ABSORBERS FOR SMOOTH
DAMPENED OPERATION
CHECK FOR LOOSE SCREWS
ON CHASSIS ESPECIALLY
THE KNUCKLE, C-HUB AND
AXLE LOCKOUT SCREWS
INSPECT THE SPUR AND
PINION GEARS FOR DAMAGE
12
CHECK FOR ANY LOOSE
CONNECTIONS OR FRAYED
WIRING
CHECK DRIVELINE FOR
SMOOTH BIND-FREE
OPERATION
REPLACE TRANSMITTER
AA'S IF THE GREEN LIGHT IS
BLINKING