VISA SN-9100 Operating Instructions Manual

OPERATING INSTRUCTIONS
FOR PREPROGRAMMED REMOTE
BRANDS OF THE SONY - PANASONIC - SAMSUNG GROUP

DESCRIPTION

1. LED indicator.
2. Access to "secondary functions".
3. Access to Teletext functions
(only on some models).
4. Switch key to access additional
memory for copying functions
by the learning procedure.
5. Main functions and code entry keys.
6. TV: On/Off or access to the
automatic Device-Code search.
7. VCR: Play or access to the
automatic Device-Code search.
8. Internal RESET key
(to be used only in the specified cases).
9. Key to initialize programming,
search or code visualising
procedures.

HOW TO MAKE YOUR REMOTE CONTROL FUNCTION IMMEDIATELY

OPEN THE BATTERY COVER AND INSERT 2 NEW ALKALINE BATTERIES, TYPE AAA/LR03 1,5V AND
•
SWITCH THE TELEVISION SET ON.
• OPEN THE FRONT COVER OF THE REMOTE CONTROL, PRESS AND RELEASE THE «CODE» KEY AND ENTER
• POINT THE REMOTE CONTROL TOWARDS THE TV SET.
• PRESS AND KEEP PRESSED THE ON/OFF KEY.
• RELEASE IMMEDIATELY THE ON/OFF KEY ONCE THE TV SWITCHES OFF.
•
CHECK THAT THE REMOTE CONTROL OPERATES THE MAIN FUNCTIONS.
•
IN THIS CASE
• THE UNIT IS READY.
• OTHERWISE REPEAT AGAIN PROCEDURE.
TO MAKE THE BEST USE OF YOUR NEW REMOTE CONTROL WE RECOMMEND THAT YOU READ IN FULL AND
CONTROLS BY BRAND

RAPID SET-UP

CLOSE THE BATTERY COVER.
TO KNOW MORE...
RETAIN THESE INSTRUCTIONS
SN-9100
1
Fig. 1