Opel ADAM Owner's Manual page 176

174 Vehicle care
1. Release the cover on the
respective side and remove.
2. Unscrew the plastic securing nut
from the inside by hand.
3. Carefully withdraw the light
assembly from the recesses and
remove.
4. Turn bulb holder anticlockwise
and remove. Replace bulb by
withdrawing:
turn signal light 1
tail light 2
tail light / brake light 3
If tail light 2 and tail light/brake
light 3 are LEDs, seek the
assistance of a workshop for
replacement.
5. Insert and turn bulb holder
clockwise into the tail light
assembly. Ensure the wires
remain in the cable ducts.
Fit light assembly with the
retaining pins into the recesses of