One Foot Connection - Aventura MON-LED-46 User Manual

7
11
Enter the first portion of the
keys on your remote. Press the
12
Enter the next portion of the
13
Repeat the entry process for each field in the
If you make a mistake when entering a number, re%enter the number to correct it. You can also
press the
14
When done entering the
15
Press the button to go to the
16
Repeat the same entry process for
17
When done, select
screen appears and the verification process starts. When the connection has been verified, the
"Internet is connected successfully." message appears.
7.1.5 WPS(PBC)
How to set up using WPS(PBC)
If your router has a
1
Go to Network Setting
2
Select WPS(PBC), press [
3
Press the WPS(PBC)
the network setting values it needs and connects to your network.
4
The network connection screen appears, and network setup is done.

7.1.6 One Foot Connection

The One Foot Connection
wireless routers. If your wireless router does not support
one of the other methods.
You can check for equipment that supports
How to set up using One Foot Connection
1
Turn on the wireless router and the product.
2
Go to Network Settings
3
Select One Foot
4
Place the wireless router in parallel with and no farther away than 25cm(about 9 3/4 inches) of
Wireless Adapter.
IP Address (for example, 105) into the first entry field using the number
button to go to the next field.
IP Address. Press the
or button to change the number one unit at a time.
IP Address, press [
Subnet Mask
Subnet Mask, Gateway, and
OK at the bottom of the page, and then press [
WPS(PBC) button, follow these steps:
screen.
], and then press [
button on your router within 2 minutes. Your product automatically acquires all
function lets you connect your Aventura product automatically to a Aventura
screen.
Connection, and press [
button to go to the next field.
IP Address.
].
fields, and then press [
DNS Server.
]. The network connection
] again.
One Foot Connection, you must connect using
One Foot Connection on www.aventuracctv.com.
], then press [ ] again.
].