Infocenter Display; Infocenter Display - Toro Groundsmaster 4500-D Service Manual

InfoCenter Display

The InfoCenter Display used on your Groundsmaster is
a LCD device that is located on the console. The Info-
Center provides information for the machine operator
during machine operation, provides electrical system
diagnostic assistance for technicians and allows inputs
for adjustable machine settings.
Splash Screens
The two (2) InfoCenter splash screens (Figs. 8 and 9)
are displayed when the ignition switch is initially turned
to the RUN or START position. The splash screens allow
basic machine information to be reviewed by the operat-
or. After each of the splash screens has been on the In-
foCenter for several seconds, the main information
screen will be displayed on the InfoCenter.
The splash screens can be used to identify machine bat-
tery voltage, hour meter reading, hydraulic oil temperat-
ure and engine status.
Electrical System
Power for the InfoCenter is available when energized by
the TEC controller (ignition switch in the START or ON
position). A CAN--bus system involving the TEC control-
lers, the Yanmar engine electronic control unit and the
InfoCenter is used to provide necessary machine com-
munication for InfoCenter operation.
1
5
1. Battery voltage
2. Hour meter
3. Right button
2
1
7
1. Battery voltage
2. Hydraulic oil temperature
3. Time to next service
4. Engine RPM
Page 5 - - 8
T
13.2V
95.2
4
Figure 8
4. Down button
5. Menu/back button
180 T
220
140
Service due
o F
in 155 hours
13.2V
RPM
0
6
Figure 9
5. Right button
6. Down button
7. Menu/back button
Groundsmaster 4500--D/4700--D
2
3
3
4
5