Storing A Child Seat - Honda 1995 Civic Owner's Manual

Child Safety
Then install the tether hardware that
came with the child seat.
Tighten the bolt to:
22 N.m(2.2 kg-m,16 Ib-ft)
If you are not sure how to install the
bracket, have it installed by your
Honda dealer.
If you need an anchor plate and
mounting hardware, you can obtain
them by writing to:
American Honda Motor Co., Inc.
Consumer Affairs
1919 Torrance Blvd.
Torrance, CA 90501-2746
Driver and Passenger Safety
Canadian Cars
TOOTHED WASHER
The anchor plate and mounting
hardware for a top tether are
supplied with the car. When
installing, make sure the toothed
washer is on the bottom of the bolt.
The supplied anchor plate is
designed only for mounting a child
restraint. Do not use it for any other
purpose.

Storing a Child Seat

When you are not using an infant
seat or other child restraint, either
remove it or make sure it is properly
secured so it cannot be thrown
around the car during a crash.