Input/Output Levels And Impedance; Adjustment Sequence; Power Supply Check; Output Voltage Check (Ma-336 Board) - Sony SLV-GA30 Service Manual

2-1-5.

Input/Output Levels and Impedance

Video input: LINE IN
Input signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
Video output: LINE OUT
Output signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
Audio input: LINE IN
Input level: –7.5 dBs
(0 dBs= 0.775 Vrms)
Input impedance: more than 47 kilohms
Audio output:LINE OUT
Standard level: –7.5 dBs at load impedance 47
kilohms
Output impedance: less than 10 kilohms
2-1-6.

Adjustment Sequence

The adjustments should be performed in the following sequence.

Power Supply Check

Servo/Video System Adjustments
Audio System Adjustments
2-2. POWER SUPPLY CHECK
2-2-1.

Output Voltage Check (MA-336 Board)

Mode
Measuring Instrument
+12 V Check
Measurement point
Specified value
+5 V Check
MP
SV
+9 V Check
MP
SV
MTR12 V Check
Measurement point
Specified value
[Check Method]
1) Each of these supply voltages must meet its specified value.
6-2
E-E
Digital voltmeter
CN201 pin !º
11.5 –13.0 V
CN206 pin !£
5.0 –5.6 V
Emitter of Q961
8.5 –10.0 V
CN204 pin 4
11.5 –13.0 V