Download Print this page

ファームウェアの書き込み - Yamaha HTR-5063 Service Manual

Hide thumbs Also See for HTR-5063:

Advertisement

■ UPDATING FIRMWARE / ファームウェアの書き込み
When the following parts are replaced, the firmware must
be updated to the latest version.
DIGITAL P.C.B.
IC49 (TI (DSP) flash ROM) of DIGITAL P.C.B.
● Confirmation of firmware version and checksum
Before and after updating the firmware, check the
firmware version and checksum by using the self-
diagnostic function menu.
Start up the self-diagnostic function and select "25.
ROM VER/SUM/PORT" menu.
Using the sub-menu, have the firmware version and
checksum displayed, and note them down.
(See "SELF-DIAGNOSTIC FUNCTION")
*
When the firmware version is different from written
one after updating, perform the updating procedure
again from the beginning.
● Initializing the back-up IC
(EEPROM: IC22 of the DIGITAL P.C.B.)
After updating the firmware, the back-up IC MUST be
initialized by the following procedure to have proper
memorization of the set up information (sound field
parameters, system memory and tuner presetting, etc.).
Start up the self-diagnostic function and select "24.
FACTORY PRESET" menu. (See "SELF-DIAGNOSTIC
FUNCTION")
Select "24. PRESET RSRV", press the " "(Power) key
of this unit to turn off the power once and turn on the
power again. Then the back-up IC is initialized.
下記の部品を交換した場合、ファームウェアを最新バー
ジョンにアップデートする必要があります。
DIGITAL P.C.B.
DIGITAL P.C.B. の IC49 (TI(DSP)フラッシュ ROM)
● ファームウェアのバージョンとチェックサムの
確認
ファームウェアのアップデートの前後に、ファーム
ウェアのバージョンとチェックサムをダイアグで確
認します。
ダイアグを起動し、 25. ROM VER/SUM/PORT を選
択します。
サ ブ メ ニ ュ ー で フ ァ ー ム ウ ェ ア の バ ー ジ ョ ン と
チェックサムを表示し、それらを書きとめます。
( 「ダイアグ」参照)
※ アップデート後、ファームウェアのバージョンが
書き込まれたものと異なる場合、アップデートの
操作を最初からやり直してください。
● バックアップ IC の初期化
(EEPROM:DIGITAL P.C.B. の IC22)
ファームウェアのアップデート後、設定情報(音場プ
ログラムのパラメーターやシステムメモリー、チュー
ナープリセット等)を正常に記憶するために、下記の
方法でバックアップ IC を初期化する必要があります。
本機のダイアグを起動し、 24. FACTORY PRESET を
選択します。 ( 「ダイアグ」参照)
24. PRESET RSRV を選択し、
して電源を一度切ってから、もう一度電源を入れる
とバックアップ IC が初期化されます。
RX-V567/HTR-5063
( パワー)キーを押
19

Advertisement

loading

This manual is also suitable for:

Rx-v567