Motorola HT750 User Manual page 37

Sending a Call
1. Turn Channel Selector knob to desired channel.
2. Press PTT and speak clearly with mouth about 2.5 to 5 cm (1 to 2 inches)
away from microphone.
3. Release PTT to listen.
Receiving a Call
1. Turn radio on and set volume level.
2. Switch to desired channel.
3. When a call is received, it will be heard at the volume level you set.
Deleting a Nuisance Channel During Scanning
1. While on a nuisance channel, press and hold preprogrammed Scan button
until you hear a tone.
2. Release Scan button.
Making a Phone Call (Keypad Radios Only)
1. Press Phone button.
2. Send access code, if required.
3. Send phone number in one of the following ways:
• Press and release PTT to send last dialed number.
— or —
• Press preprogrammed Speed Dial button, followed by a keypad key (1–9),
to access first nine numbers in your phone list. (Press PTT if buffered dial.)
— or —
• Enter phone number using the keypad (Press PTT if buffered dial.)
4. Hold radio in vertical position with microphone about 2.5 to 5 cm (1 to 2
inches) away from your mouth. Press PTT to talk; release it to listen.
Ending a Phone Call (Keypad Radios Only)
1. Send de-access code, if required.
2. Press preprogrammed Phone button.
Sounding an Emergency Siren
• Press preprogrammed Emergency button (Top button [D]) to sound
Emergency Siren .
• Press Emergency button again to stop Emergency Siren .
Record the functions for your radio's programmable buttons in the table
provided below. For further information, see pages 5 and 6 in this User Guide.
Channel Selector Knob
On/Off/Volume Knob
Side Button 1 (A)
(programmable)
Push-to-Talk (PTT)
Button
Side Button 2 (B)
(programmable)
Side Button 3 (C)
(programmable)
Button Function Short Press
™
HT750 Quick Reference Card
Top Button (D)
(programmable)
LED Indicator
Microphone
Front Buttons (optional)
(P1, P2, P3)
(programmable)
(optional)
Long Press Hold Down
Keypad
Page