Setting Your Receiver; Timer Manager - Philips DCR 2021 User Manual

DCR 2021_Premiere_indice 1b

10 Setting your receiver

EN
76
8/03/06 16:29 Page 76

10.1 Timer Manager

The Timer Manager is used to set, edit or delete:
• recording timers for the programmes you want to
record using your VCR or DVD recorder,
• reminders for the programmes you want to see in
the near future.
To be able to record a digital channel using a VCR
or DVD recorder, you must programme both
your recorder and receiver:
- You must set a timer on your receiver.
- You must also set a recording on the VCR or DVD
recorder (refer to the VCR or DVD recorder user
manual).
To avoid programming both your receiver and your
recorder, you may also use Easy Recording provided
this function is supported by your recorder. Refer to
paragraph 11.3.
To delete an existing timer:
1 Scroll to the timer you want to delete.
2 Press the red colour key to delete it from the timer list.
3 Press OK to confirm deletion.
4 Press EXIT to exit the screen.
To set a new timer or edit an existing timer:
1 Scroll to the timer you want to edit and press OK
to select it from the timer list.
Alternatively, press the green colour key to set a
new timer.
2 Then set or modify the following:
• Mode: select TV or Radio service using the u
or ikey.
• Channel list: select the list to which the channel
you want to record belongs using the u or ikey.
• Channel: select the number of the channel on
which the programme you want to record is
broadcast using the u or ikey.
• Date: select a date using the numerical keys or the
u or ikey.