Download Print this page

Advertisement

Quick Links

WARRANTY
This warranty has a term of two (2) years from the manufacturing date or one (1) year from the date of the
dealer's invoice, whichever expires first. It covers manufacturing defects that may arise during this period.
When verifying some manufacturing defect, you should take the product along with its purchasing
invoice to the store where you bought it, so that, after the dealer's analysis, your product can be either
repaired or replaced free of cost, except for any other freight expenses to the dealer store.
We do not accept complaints within the warranty term if:
a) The product has been installed without observing the INSTALLATION INSTRUCTIONS provided in
this manual;
b) The loudspeaker presents defect like torn, perforated or wet cone; installation in improper place;
distorted or smashed basket; moving coil burned due to use out of the specifications;
c) After being inspected, the product shows evidences of modifications or repairs made by unauthorized
personnel;
d) There is evidence that chemicals were used on the loudspeaker components;
e) The loudspeaker has been burned due to the use of amplifiers (power modules) not having protective
under-voltage (Battery voltage drop) circuit.
This warranty applies only to the first purchaser so that there is no conflict with the current law.
Should HINOR decide to modify the design and/or to make technical improvements on this product, it
shall not be obliged to include such changes in any product manufactured before.
The warranty offered herein covers only the repair or replacement of the product, and HINOR does not
take responsibility for any claim for indemnification of any kind.
NH INDÚSTRIA E COMÉRCIO LTDA
ROD. BR 470, km140, 5640 - VALADA
89.160-000 RIO DO SUL (SC) - BRAZIL - PHONE: (47) 3531-8800
CNPJ 85776466/0001-36 - I.E.250170515
INDÚSTRIA BRASILEIRA - MADE IN BRAZIL
ITOUPAVA
www.hinor.com.br
e-mail: hinor@hinor.com.br
Toll-free
0800-478002

Advertisement

loading
Need help?

Need help?

Do you have a question about the i5 line and is the answer not in the manual?

Questions and answers

Summary of Contents for hinor i5 line

  • Page 1 The warranty offered herein covers only the repair or replacement of the product, and HINOR does not take responsibility for any claim for indemnification of any kind.
  • Page 2 Features Performance Graphs This range of loudspeakers has been developed to reproduce low frequencies with high sound Frequency response pressure free of distortion. These are essential features when the reproduction of bass and The frequency response expresses the sensibility curve of the loudspeaker in all of its audible sub-bass frequencies is required.
  • Page 3 - Insulate the inside of the walls with a blanket of acrylic fiber or automotive felt; *The loudspeaker is supplied by the amplifier with electric power, which is converted in sound by the vibration of its moving parts. Hinor shall not be - Weld the cable ends with tin and avoid making amendments.
  • Page 4 Acoustic Boxes Data for the Construction of Acoustic Boxes BOX TYPE AIR DUCTS Recommended Table 05 Recommended RESPONSE RECTANGULAR TRAPEZE For OUTWARD SOUND, use the P-length Adjustment of the air duct length Box with WARNING: For INWARD SOUND, use the Pmax-length Diam cylindrical air ducts...

This manual is also suitable for:

I8 line