Advertisement
INSTRUCTION
MANUAL
Bluetooth Module wireless Helmet Interface
For use with all 7pin headset Autocom systems
WIRE3-A
It is very important that you fully read and understand all of
these instructions before installation and use.
These parts are designed for domestic motorcycle use.
WIRE3
WIRE3
Advertisement
Table of Contents
Summary of Contents for autocom WIRE3
- Page 1 INSTRUCTION MANUAL WIRE3 Bluetooth Module wireless Helmet Interface For use with all 7pin headset Autocom systems WIRE3-A WIRE3 It is very important that you fully read and understand all of these instructions before installation and use. These parts are designed for domestic motorcycle use.
- Page 2 The DIN headset plug cable must be plugged into the Autocm, this provides the 0V connection. For use with Super Pro Auto: The WIRE3 module has a 1.3mm power plug, when used with a Super Pro Auto this plugs directly into the Bluetooth Power socket on the front of the unit, see (picture 1).
- Page 3 WIRE PAIRING THE WIRE3 MODULE You are required to pair the WIRE3 with your helmet Bluetooth headset devices before using it. Step 1: The WIRE3 module must be connected to Autocom headset connector and powered ON before initiating pairing, this is indicated by a slow flashing blue led. To initiate pairing, press the pairing button until the blue indicator of WIRE3 is flashing quickly.
- Page 4 +44 (0)1480 399502 Email: enquiries@autocom.co.uk Website: www.autocom.co.uk We service what we make For details of Autocom’s International distributors and support network, please see our website. Please contact your supplier or Autocom for any further help or information. UK Manufacturer and Distributor...
Need help?
Do you have a question about the WIRE3 and is the answer not in the manual?
Questions and answers